基于遗传算法的薄煤层综采工作面三机配套研究

doi:10.11799/ce201512041

COAL ENGINEERING ›› 2015, Vol. 47 ›› Issue (12): 133-135.doi: 10.11799/ce201512041

Research on Three-Machine Matching in Fully Mechanized Coal-mining Thin Seam Working Face Based on the Genetic Algorithm

Received:2015-01-06 Revised:2015-09-18 Online:2015-12-11 Published:2015-12-29

Abstract

Abstract: According to fully mechanized coal face matching principle in the thin coal seam, these parameters in three machines-hydraulic support, shearer and scraper conveyer- are further optimized by using genetic algorithm. Using Xiandewang mine as an example, relevant comparisons and summaries has been made about optimized parameter values. Finally, simulation and test data verify the correctness and rationality of evaluation calculation.

Key words: Thin coal seam, Genetic algorithm, Three-Machine matching

CLC Number:

TD42

0
/ / Recommend

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.coale.com.cn/EN/10.11799/ce201512041

http://www.coale.com.cn/EN/Y2015/V47/I12/133

[1]	. Prediction of Flotation Dosage Based on GA-BP Neural Network [J]. COAL ENGINEERING, 2017, 49(2): 106-108.
[2]	. Optimal Design for Articulated Steering Mechanism Based on Genetic Algorithm [J]. COAL ENGINEERING, 2015, 47(3): 138-140.
[3]	. Determination of Rational Parameters for Roadside Backfill Body in Gob-Side Entry Retaining in Thin Coal Seam [J]. COAL ENGINEERING, 2015, 47(3): 58-60.
[4]	. Research on Cooperative Genetic Algorithm of Mine Support Equipment [J]. COAL ENGINEERING, 2015, 47(11): 114-116.
[5]	. Study on support structure of ranging arm planetary mechanism of thin coal seam shearer [J]. COAL ENGINEERING, 2015, 47(10): 132-134.
[6]	. Research of Fan Fault Diagnosis Based on Genetic Algorithm [J]. COAL ENGINEERING, 2015, 47(1): 101-103.
[7]	. Study on the prediction method of surface subsidence coefficient using GA-GRNN [J]. COAL ENGINEERING, 2014, 46(7): 94-96.
[8]	. Analysis on Rock Burst Forecasting and Monitoring Technology of thin coal seam in Xinxing Mine [J]. COAL ENGINEERING, 2014, 46(4): 52-54.
[9]	. Study on the Technology of Pillarless Simultaneous Extraction of Coal and Gas of Thin Coal Seam as Protective Seam Mining [J]. COAL ENGINEERING, 2014, 46(2): 9-11.
[10]	. Research on gob-side entry retaining technology in gateway of thin seam fully mechanized coal face using new type of high-water material to construct roadside packing body [J]. COAL ENGINEERING, 2013, 45(8): 50-53.
[11]	. The Pressure Modeling Method of Coal Slurry Transportation Pipeline Based on Genetic Algorithm and Neural Network [J]. COAL ENGINEERING, 2013, 45(7): 108-110.
[12]	. Research on Technology of Adjustment Inclination and Rotation Mining in Inclined Thin Coal Seam and Protective Layer Fully- mechanized Face [J]. COAL ENGINEERING, 2013, 45(10): 51-53.
[13]	. Research on Forecasting of Airflow Temperature in Heading Face Based on The GA-BP neural network [J]. COAL ENGINEERING, 2013, 1(1): 105-107.
[14]	. The Design of PID Controller Based on Fuzzy Neural Network to Mine Local Ventilator [J]. COAL ENGINEERING, 2011, 1(6): 127-129.
[15]	. Memory Cutting Path Optimization of the Shearer Based on Genetic Algorithm [J]. COAL ENGINEERING, 2011, 1(2): 111-112.

Research on Three-Machine Matching in Fully Mechanized Coal-mining Thin Seam Working Face Based on the Genetic Algorithm

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments