超大采高工作面回采关键技术研究

doi:10.11799/ce201807001

Abstract

CLC Number:

TD823

0
/ / Recommend

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.coale.com.cn/EN/10.11799/ce201807001

http://www.coale.com.cn/EN/Y2018/V50/I7/1

[1]代贵生,周海峰.年产1400万t大采高工作面关键技术研究[J].煤炭科学技术,2014(12):120-124．
[2]程建祯.大采高工作面开采方式的合理选择[J].煤炭科学技术,2011(05):11-13+17.
[3]赵宏珠.特大采高液压支架发展与研究.采矿安全与工程学报,2007,24(03):265-269.
[4]昝平.大采高工作面煤壁片帮机理分析及应对方案[J].内蒙古煤炭经济，2017(12):114-115.
[5]杨胜利等.浅埋深大采高工作面矿压显现规律及煤壁稳定性研究[J].煤炭工程,2010,（06):55-58．
[6]殷帅峰.大采高综放面煤壁片帮机理与控制技术研究[D].中国矿业大学（北京），2014年.
[7]范文胜.大采高综采工作面两端头割煤工艺优化[J].煤矿开采,2014(05):26-28．
[8]代贵生.垂直过渡工艺在综采工作面中的应用[J].煤矿安全,2014(11):141-143．
[9]陈苏社.7m大采高综采工作面初采强制放顶技术研究[J].陕西煤炭,2016(S1):5-8.
[10]唐辉.近浅埋煤层大采高工作面矿压显现规律研究[J].煤矿安全,2017(07):49-51+56.
[11]韩俊效.寺河矿大采高长工作面矿压显现规律研究[D].河南理工大学,2011.
[12]胡国伟,靳钟铭.大采高综采工作面矿压观测及其显现规律研究[J].太原理工大学学报,2006,37(02):127-130．
[13]崔廷锋等.浅埋煤层大采高工作面矿压显现规律及支架适应性[J].煤炭科学技术,2011,39(01):25-28．
[14]苗彦平.浅埋煤层大采高综采面矿压规律与支护阻力研究[D].西安科技大学,2011年.
[15]郝海金,吴健,张勇,等.大采高开采上位岩层平衡结构及其对采场矿压显现的影响[J].煤炭学报,2004,29(02)：137-141．
[16]范文胜佘晨.综合灭火技术在补连塔煤矿的应用[J].煤矿安全,2013(05):145-147．
[17]任建军.大采高超长综采工作面采空区自然发火规律研究[D].华北科技学院,2015年.

Research on Key Techniques of Mining at 8 Meters Mining Height Fully Mechanized Face

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Dong FeiSun. Research on Coal Mining Method and Face Parameters under Multiple Disasters [J]. COAL ENGINEERING, 2019, 51(4): 1-5.
[2]	guoxin luxinzhengyongsheng. Research on the law of pressure and supporting technology of the near distance cross mining roadway [J]. COAL ENGINEERING, 2019, 51(4): 46-48.
[3]	. The application of the overall comparison method in the optimization design of the development plan of Hami No. 1 Mine [J]. COAL ENGINEERING, 2019, 51(3): 5-8.
[4]	. Study on the filling technology of high water material in coal working face [J]. COAL ENGINEERING, 2019, 51(3): 60-64.
[5]	. [J]. COAL ENGINEERING, 2019, 51(1): 1-6.
[6]	. Study on the sequential extraction technology of gob-side entry driving of super long propulsion working face in the cha ha Su coal mine [J]. COAL ENGINEERING, 2019, 51(1): 55-59.
[7]	. [J]. COAL ENGINEERING, 2018, 50(12): 9-12.
[8]	. Research and practical application of the balanced mining technology of continuous coal mining machine [J]. COAL ENGINEERING, 2018, 50(12): 58-61.
[9]	. [J]. COAL ENGINEERING, 2018, 50(10): 70-73.
[10]	. Bidirectional cutting coal technique of continuous miner [J]. COAL ENGINEERING, 2018, 50(10): 92-95.
[11]	. Development Status and Tendency of Coal Gangue Identification Technology [J]. COAL ENGINEERING, 2018, 50(10): 142-145.
[12]	. The mechanism and prevention of supports failure in the head of fully mechanized caving face in Daliuta coal mine [J]. COAL ENGINEERING, 2018, 50(9): 52-55.
[13]	. Study on technological parameters of fully mechanized top coal caving mining in thick coal seam [J]. COAL ENGINEERING, 2018, 50(9): 56-58.
[14]	zhang lingyun. Principle and Control Technology of Coal Wall Spalling of Super Length Working Face Zhang Ling-yun [J]. COAL ENGINEERING, 2018, 50(9): 88-90.
[15]	. Research on the Technique of Gob-side Retaining and Shearer cutting Tunnel mining System in Nanliang Coal Mine [J]. COAL ENGINEERING, 2018, 50(8): 1-6.