急倾斜煤层大断面开切眼快速施工技术研究

doi:10.11799/ce201506019

COAL ENGINEERING ›› 2015, Vol. 47 ›› Issue (6): 58-60.doi: 10.11799/ce201506019

　　　The rapid construction technology research of large section open Cut in Steep Seam

Received:2014-04-17 Revised:2014-07-08 Online:2015-06-10 Published:2015-06-12

Abstract

Abstract: Abstract:liziya South Second mine first mining face inclination is 48°,soft roof and floor rock,coal has outburst,fast, how to cutting through fast a safe and economical open cut，control a good roof is a major problem.After many discussions,uses the anti-well drill through the construction,using limit equilibrium method for support designing.Mine pressure monitoring results show that the construction technology and support is feasible,the construction can be realized quickly and safely, and the open cut distortion has been effectively controlled.

Key words: Keywords: Anti-driller law, large section open - cut, steep seam, combined support, tunneling

CLC Number:

TD263.5

0
/ / Recommend

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.coale.com.cn/EN/10.11799/ce201506019

http://www.coale.com.cn/EN/Y2015/V47/I6/58

[1]	. Study on the reasonable section coal pillar width for fully mechanized caving face with hard roof and extra-thick coal seam [J]. COAL ENGINEERING, 2019, 51(5): 43-47.
[2]	. Reasearch On Control Technology and Factor Analysis of Hydrogen Sulfide Emission in Steeply Dipping and Extra-thick Coal Seam [J]. COAL ENGINEERING, 2017, 49(1): 56-59.
[3]	. Research on the support technology of Bolt-mesh-anchor in hard roof and deep mines [J]. COAL ENGINEERING, 2016, 48(7): 50-52.
[4]	. The compound truss cable research based on prestress decreases theory [J]. COAL ENGINEERING, 2016, 48(6): 44-47.
[5]	. Pipe shed roof steel arch anchor cable combined Support used in the fault group [J]. COAL ENGINEERING, 2016, 48(1): 49-51.
[6]	. Comprehensive Construction Technology on Tunneling Roadway Through the Fractured Surrounding Rock in Extremely Soft Outburst Coal Seam [J]. COAL ENGINEERING, 2015, 47(3): 55-57.
[7]	. Grouting Water Sealing Technology for Mine Shaft Sinking through Water Bearing Goaf [J]. COAL ENGINEERING, 2015, 47(2): 41-43.
[8]	. Study and Application of Bolt-Steel Mesh-Anchor Combined Support Technology in Mass Cross-Section Lane with Compound Roof [J]. COAL ENGINEERING, 2015, 47(1): 37-39.
[9]	. The Application of Site Sensitised Emulsion explosive Technique at large section mining in steep seam [J]. COAL ENGINEERING, 2014, 46(9): 70-72.
[10]	. The study of the heading machine applied in the high-angle bord-up construction [J]. COAL ENGINEERING, 2014, 46(6): 46-47.
[11]	. Study on Supporting Technology of Wedged Wall in Alternating Point of Roadways [J]. COAL ENGINEERING, 2014, 46(12): 42-44.
[12]	. Design of integrative multifunctional platform for mine [J]. COAL ENGINEERING, 2013, 45(9): 122-124.
[13]	. Exploration and Practice in large cross section of cut eye’s combined support under the complex geological condition [J]. COAL ENGINEERING, 2013, 45(6): 31-33.
[14]	. Research on the fast tunneling technology of large cross-section’s gob-side entry in DongPang Coal Mine [J]. COAL ENGINEERING, 2013, 45(10): 38-39.
[15]	. Application and study on composite soft rock roadway support technology of Ma Jialiang coal mine [J]. COAL ENGINEERING, 2013, 1(1): 29-31.

The rapid construction technology research of large section open Cut in Steep Seam

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments