[1] |
.
The Optimized Designing For Width of Mining And Coal Pillar For Solid Backfill Strip Mining
[J]. , 2019, 51(6): 0-0.
|
[2] |
.
Optimization of Open-Pit Mine Drainage Scheme Based on AHP-GRAP Method
[J]. , 2019, 51(6): 0-0.
|
[3] |
.
Thoughts on the Reduction of Solid Wastes in Green Mine
[J]. COAL ENGINEERING, 2019, 51(5): 40-42.
|
[4] |
.
Study on the reasonable section coal pillar width for fully mechanized caving face with hard roof and extra-thick coal seam
[J]. COAL ENGINEERING, 2019, 51(5): 43-47.
|
[5] |
FAN ZHENGXIANG.
Open pit stripping ratio and special cases must to be paid attention
[J]. COAL ENGINEERING, 2019, 51(5): 56-59.
|
[6] |
.
Research on optimization of steering scheme in Tianchi Energy Nan open-pit mine in Xinjiang
[J]. COAL ENGINEERING, 2019, 51(5): 60-64.
|
[7] |
Dong FeiSun.
Research on Coal Mining Method and Face Parameters under Multiple Disasters
[J]. COAL ENGINEERING, 2019, 51(4): 1-5.
|
[8] |
guoxin luxinzhengyongsheng.
Research on the law of pressure and supporting technology of the near distance cross mining roadway
[J]. COAL ENGINEERING, 2019, 51(4): 46-48.
|
[9] |
.
The application of the overall comparison method in the optimization design of the development plan of Hami No. 1 Mine
[J]. COAL ENGINEERING, 2019, 51(3): 5-8.
|
[10] |
.
Discussion on crossing ditch mining design of ultra thin bedrock shallow buried coal seam mining
[J]. COAL ENGINEERING, 2019, 51(3): 9-12.
|
[11] |
.
Study on the filling technology of high water material in coal working face
[J]. COAL ENGINEERING, 2019, 51(3): 60-64.
|
[12] |
.
[J]. COAL ENGINEERING, 2019, 51(1): 1-6.
|
[13] |
.
Application Status and Existing Problems Analysis of Dragline Stripping Technology in China
[J]. COAL ENGINEERING, 2019, 51(1): 28-34.
|
[14] |
.
Study on the sequential extraction technology of gob-side entry driving of super long propulsion working face in the cha ha Su coal mine
[J]. COAL ENGINEERING, 2019, 51(1): 55-59.
|
[15] |
.
Elastic-Plastic FEM Computing Method for Wet Slope Stability of Open Coal Mine
[J]. COAL ENGINEERING, 2019, 51(1): 96-100.
|