| [1] |
.
[J]. COAL ENGINEERING, 2017, 49(10): 1-6.
|
| [2] |
.
[J]. COAL ENGINEERING, 2017, 49(10): 7-11.
|
| [3] |
.
[J]. COAL ENGINEERING, 2017, 49(10): 12-15.
|
| [4] |
.
[J]. COAL ENGINEERING, 2017, 49(10): 16-19.
|
| [5] |
.
[J]. COAL ENGINEERING, 2017, 49(10): 26-29.
|
| [6] |
.
[J]. COAL ENGINEERING, 2017, 49(10): 30-34.
|
| [7] |
.
[J]. COAL ENGINEERING, 2017, 49(10): 35-37.
|
| [8] |
.
[J]. COAL ENGINEERING, 2017, 49(1): 77-79.
|
| [9] |
.
Study on the optimization for the drawing technique oflongwall top-coal caving inextra-thick coal seam condition based on BBR system
[J]. COAL ENGINEERING, 2016, 48(2): 1-4.
|
| [10] |
.
Characteristic and control method of initial interface between coal and rock under longwall top coal caving technique
[J]. COAL ENGINEERING, 2015, 47(7): 1-4.
|
| [11] |
.
Failure behavior of specimen under the action of pore water pressure and load
[J]. COAL ENGINEERING, 2015, 47(7): 78-81.
|
| [12] |
.
Feasibility Study on Specially Thick Seam Fully-mechanized Ming Under Mining Goaf with Short Distance
[J]. COAL ENGINEERING, 2015, 47(6): 91-94.
|
| [13] |
.
Study on the determination of narrow coal pillar width with large section roadway extraction of driving along next goaf in fully mechanized top face
[J]. COAL ENGINEERING, 2015, 47(6): 7-10.
|
