煤炭工程 ›› 2013, Vol. 45 ›› Issue (11): 93-95.doi: 10.11799/ce201311031

• 研究探讨 • 上一篇    下一篇

直流电法布极方式对巷道超前探测精度研究

潘越1,王月2,李德军3,4,赵卓云3,陈尉2,3,孙鹏程2,3   

  1. 1. 河北工程大学 机电工程学院
    2. 河北工程大学
    3.
    4. 山西煤炭进出口集团蒲县豹子沟煤业有限公司
  • 收稿日期:2013-06-16 修回日期:2013-04-12 出版日期:2013-11-10 发布日期:2013-11-11
  • 通讯作者: 王月 E-mail:wangyuerun@126.com

DC Method Arrangement Electrode Way and Roadway Advanced Detection Precision Relationship Study

  • Received:2013-06-16 Revised:2013-04-12 Online:2013-11-10 Published:2013-11-11

摘要:

通过直流电法电极布置几何分析,提出了发射电极与测量电极极距关系公式。对于可能存在地质异常的重点区域可同时调整二者极距,通过增加探测密度的方式提高探测精度。经研究发现电极随布置数量的增加,其探测精度随之提高。通过单倍与多倍极距对比实验,得出可通过调整极距提高探测精度,解决了直流电法在测量精度不高、定位不准等方面的难题,提高了煤矿生产安全。

关键词: 直流电法, 布极方式, 超前探测, 测量精度

Abstract:

Through Dc electrode arrangement forward modeling, put forward emission electrode and measuring electrode pole pitch relationship formula. For there may be a key area of geological anomalies can be adjusted the two pole pitch at the same time, to improve the detection precision by increasing the detecting density way. After study found that the detection accuracy improved with electrode increase in the number arrangement. Through the contrast experiment of haploid and polyploid pole pitch, can improve detection precision by adjusting the pole pitch, solve the hard problem that Dc method is not high in the measurement accuracy and not accurate in position.

Key words: DC electric method, arrangement electrodes way, advanced detection, detection precision