煤炭工程 ›› 2014, Vol. 46 ›› Issue (9): 20-22.doi: 10.11799/ce201409007
• 设计技术 • 上一篇 下一篇
陈红蕾1,高伟2,李宁1
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
Received:
Revised:
Online:
Published:
摘要:
在普通凿井施工遇到施工困难转入冻结法凿井施工时,须对普通法施工的成型井壁采取防冻害保护措施。采用温控孔控制冻结锋面向内发展是行之有效的方法,但目前温控孔系统设计没有规范和理论支撑。本文借助有限元数值模拟软件-ANSYS针对温控孔的设计进行了初步研究,总结温控孔设计方法。
关键词: 井壁保护, 温控孔, 热流密度
Abstract:
When ordinary method changes in freezing method in coal mine construction, antifreeze protection measures must be taken for the forming wall in common construction method. The effective method is the temperature control hole controlling the development of freezing front, but there are no specifications and theoretical supports for the temperature control hole design in protection of the forming wall. With the help of the finite element numerical simulation software-ANSYS, the article has done a preliminary study about design of the temperature control hole in Tashidian air shaft construction, and summarizes the design method.
Key words: Protection of Forming Wall, Temperature Control Hole, Heat Flux Density
陈红蕾,高伟,李宁. 成型井壁保护措施中温控孔系统设计探讨[J]. 煤炭工程, 2014, 46(9): 20-22.
0 / / 推荐
导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks
链接本文: http://www.coale.com.cn/CN/10.11799/ce201409007
http://www.coale.com.cn/CN/Y2014/V46/I9/20
[1] 马国庆,钱玉林,混凝土的冻害及其机理[J].《常州工学院学报》2005年12月28卷增刊:109~112。 [2] 张涛,齐善忠. 局部保温条件下单管冻结温度场研究[J]. 《山西建筑》第32卷第7期:137~138。 [3] 姚直书,程桦等,西部地区深基岩冻结井筒井壁结构设计及优化[J].《煤炭学报》2010年5月第35卷第5期: 760~764。 [4] 陈文豹,徐光济,建井工程手册(第四卷)1984年。