成型井壁保护措施中温控孔系统设计探讨

doi:10.11799/ce201409007

煤炭工程 ›› 2014, Vol. 46 ›› Issue (9): 20-22.doi: 10.11799/ce201409007

成型井壁保护措施中温控孔系统设计探讨

陈红蕾¹,高伟²,李宁¹

1. 北京中煤矿山工程有限公司
2. 天地科技股份有限公司

收稿日期:2014-03-11 修回日期:2014-04-21 出版日期:2014-09-10 发布日期:2014-09-10
通讯作者: 陈红蕾 E-mail:chenhonglei524@126.com

Design of Temperature Control Hole System in Protection of Forming Wall

Received:2014-03-11 Revised:2014-04-21 Online:2014-09-10 Published:2014-09-10

摘要/Abstract

摘要：

在普通凿井施工遇到施工困难转入冻结法凿井施工时，须对普通法施工的成型井壁采取防冻害保护措施。采用温控孔控制冻结锋面向内发展是行之有效的方法，但目前温控孔系统设计没有规范和理论支撑。本文借助有限元数值模拟软件-ANSYS针对温控孔的设计进行了初步研究，总结温控孔设计方法。

关键词: 井壁保护, 温控孔, 热流密度

Abstract:

When ordinary method changes in freezing method in coal mine construction, antifreeze protection measures must be taken for the forming wall in common construction method. The effective method is the temperature control hole controlling the development of freezing front, but there are no specifications and theoretical supports for the temperature control hole design in protection of the forming wall. With the help of the finite element numerical simulation software-ANSYS, the article has done a preliminary study about design of the temperature control hole in Tashidian air shaft construction, and summarizes the design method.

Key words: Protection of Forming Wall, Temperature Control Hole, Heat Flux Density

陈红蕾，高伟，李宁. 成型井壁保护措施中温控孔系统设计探讨[J]. 煤炭工程, 2014, 46(9): 20-22.