煤炭工程 ›› 2014, Vol. 46 ›› Issue (11): 27-29.doi: 10.11799/ce201411009

• 施工技术 • 上一篇    下一篇

立井高承压水上工作面止浆垫和岩帽参数设计研究

张兵奇   

  1. 平顶山点通传奇教育文化培训学校
  • 收稿日期:2013-07-29 修回日期:2013-10-09 出版日期:2014-11-11 发布日期:2014-11-12
  • 通讯作者: 张兵奇 E-mail:zhangbingqi666@163.com

Research on designed parameters for grouting pad and rock cap under the condition of shaft with the high pressure water

  • Received:2013-07-29 Revised:2013-10-09 Online:2014-11-11 Published:2014-11-12

摘要:

立井含水层工作面预注浆时,为了阻止注浆过程中大量的浆液渗透到工作面,降低注浆效果,因此必须得合理的构筑高强度混凝土止浆垫,条件允许可以留设岩帽与止浆垫共同构成承压部分,止浆垫设计的合理与否直接影响工作面的注浆效果,影响止浆垫的因素甚多,本文通过分析影响止浆垫的因素并结合红四煤矿的地质和水文条件,设计并计算出工作面预注浆止浆垫的形式和参数,保障了注浆的效果,为红四煤矿主立井掘进期间工作面预注浆提供了可靠的安全作业环境,也为相同条件下工作面预注浆止浆垫的合理设计提供了理论依据。

关键词: 工作面预注浆, 止浆垫, 止浆垫参数, 深立井

Abstract:

Shaft aquifer pre-grouting working face, in order to prevent the grouting process in a lot of slurry infiltrated into the working face, reducing the grouting effect, therefore we must construct high strength concrete grouting pad reasonable, if the condition allows setting of rock cap and grout pad constitute pressure, grout pad design is reasonable or not directly effect of the grouting effect, there are many factors affecting grouting pad, is discussed in this paper through the analysis of the effects of grouting pad and combined with the geological and hydrological conditions the fourth coal mine, design and calculate the working face pre - grouting grout pad forms and parameters, guarantee the grouting effect, provides a safe working environment and reliable to work during the 4th coal mine main shaft excavation face pre-grouting, it also provides a theoretical basis for the rational design of the same conditions pre-concreting grout pad.

Key words: pregrouting of working face, grouting pad, parameters of grouting pad, deep shaft