煤炭工程 ›› 2016, Vol. 48 ›› Issue (10): 81-83.doi: 10.11799/ce201610026

• 研究探讨 • 上一篇    下一篇

煤矿开采引起地表裂缝发育宽度和深度研究

高超   

  1. 天地科技股份有限公司
  • 收稿日期:2015-08-10 修回日期:2015-10-07 出版日期:2016-10-10 发布日期:2016-11-03
  • 通讯作者: 高超 E-mail:gaochao@tdkcsj.com

Research on Surface Crack Depth and Crack Width Caused by Coal Mining

  • Received:2015-08-10 Revised:2015-10-07 Online:2016-10-10 Published:2016-11-03

摘要: 为确定地下煤层开采后的地表裂缝发育情况,首先分析了天然土体的受力情况和极限平衡状态,并应用莫尔-库伦准则对地表裂缝发育机理进行了研究。推导出受采动影响的附加应力作用下地表裂缝临界水平变形值、裂缝深度发育和裂缝宽度发育计算公式。通过将试验矿区的黄土物理力学性质参数代入理论计算公式,与现场实际裂缝宽度相比较,结果表明文章中的理论计算公式计算结果具有较高的可信度。

关键词: 地表裂缝, 临界水平变形, 裂缝深度, 裂缝宽度

Abstract: To determine the development situation of surface cracks after the underground coal seam mining, this paper analyzed force of natural soil and its limit equilibrium state, and applied the Mohr-Coulomb criterion to study law of development regularity for surface cracks.Under action of the additional stress which generated by coal seam mining, this paper deduced calculation formula of critical horizontal deformation, crack depth and crack width. With assignment the test parameters of loess physical and mechanical properties in the mining area, and compared theoretical calculation formula results with the actual crack width, the results show that the theoretical formula calculation results in the article has a high credibility.

中图分类号: