煤炭工程 ›› 2014, Vol. 46 ›› Issue (4): 20-22.doi: 10.11799/ce201404007
• 设计技术 • 上一篇 下一篇
吴秀祥1,王聪2,王畅1,王晶1
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
Received:
Revised:
Online:
Published:
摘要:
摘 要:当矿井提升机的大功率单元级联型交-直-交变频调速系统功能出现运行故障时,需要安全快速找出存在的问题。本文讨论了测试方案的拟定,以及提升机传动特性检测系统的实际构成,包括:高阻隔离变压器供电单元、信号标定单元、隔离放大单元、行程测量单元。论文最后给出了应用传动特性检测系统进行测试的结果及其分析,得到了有意义的结论。
关键词: 关键词: 煤矿提升机, 传动特性, 检测系统, 分析
Abstract:
Abstract:When the high-power cascaded AC/DC/AC frequency converter system of mine hoist is faulty,we need find out the problem existing quickly and safety.This article mainly confirms the testing contents and designs detecting system for mine hoist transmission characteristics.The system includes: transformer power unit with high isolation, signal calibration unti, isolated amplifier unit, distance measure unit. Also we make a analysis of the testing results, and finally get a meaningful conclusion.
Key words: Keywords:mine hoist, transmission characteristics, detecting system, analysis
吴秀祥,王聪,王畅,王晶. 煤矿提升机传动特性检测系统的设计与分析[J]. 煤炭工程, 2014, 46(4): 20-22.
0 / / 推荐
导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks
链接本文: http://www.coale.com.cn/CN/10.11799/ce201404007
http://www.coale.com.cn/CN/Y2014/V46/I4/20
[1] 王清灵,龚幼民.现代矿井提升机电控系统[M].北京:机械工业出版社,1996 [2] 马晓亮.高性能变频调速及其典型控制系统[M].北京:机械工业出版社,2010 [3] 于忠升,宋伟刚.矿山运输提升[M].沈阳:东北大学出版社,1992 [4] 尹永强,韦盟杰,余宏伟.基于高线性光耦HCNR201的交流信号隔离电路的实现[J].电测与仪表,2008,45(11):50~54. [5] 刘竟雄,王安山,邓维华.数字式提升行程控制器[J].矿业研究与开发,1998,(03):38-40.