煤炭工程 ›› 2025, Vol. 57 ›› Issue (5): 1-7.doi: 10. 11799/ ce202505001

• 设计技术 •    下一篇

深厚富水弱胶结围岩井筒冻结深度影响因素分析及优化

周爱平,谭杰,乔文俊,等   

  1. 1. 神华新街能源有限责任公司
    2. 天地科技股份有限公司建井研究院
  • 收稿日期:2024-06-05 修回日期:2024-07-24 出版日期:2025-05-13 发布日期:2025-07-03
  • 通讯作者: 谭杰 E-mail:378598485@qq.com

Analysis and optimization of factors influencing the frozen depth of shaft lining in deep water-rich weakly cemented surrounding rock#br#

  • Received:2024-06-05 Revised:2024-07-24 Online:2025-05-13 Published:2025-07-03
  • Contact: tan jie E-mail:378598485@qq.com

摘要:

西部煤矿井筒多穿过白垩系和侏罗系深厚富水弱胶结围岩,大直径井筒需采用冻结法施工。冻结深度的确定将关系到井筒能否安全顺利施工,且对于深井冻结,井筒深部的冻结费用增幅明显。为合理确定井筒冻结深度,在分析其影响因素的基础上,提出了需综合分析井筒相关硐室位置及尺寸、井筒地质条件(包含工程地质条件和水文地质条件)两大因素的影响。在对新街一井主、副井井筒相关硐室、地层岩性分布规律及含水性等条件具体分析的基础上,结合对周边矿井井筒施工经验的对比分析,研究提出了本矿井井筒的冻结深度方案,分析了其优缺点并进行了技术经济比较,并最终确定了井筒冻结深度,该研究方法可以为相似地质条件下井筒冻结深度的确定提供借鉴。

关键词:

深厚富水弱胶结围岩 , 冻结深度 , 影响因素 , 岩性分布规律

Abstract: Abstract: In China’s western coal mines, shafts need pass through deep, water-rich, weakly cemented surrounding rock for-mations from Cretaceous and Jurassic periods. Artificial ground freezing methods are applied during the construction of large-diameter shafts. Determining the appropriate frozen depth is crucial for safe and successful shaft lining construction. In the case of deep shaft freezing, the cost of freezing significantly increases with depth. To rationally determine the shaft lining's frozen depth, the factors influencing frozen depth are analyzed, and a comprehensive assessment based on two main factors: the loca-tion and dimensions of shaft-related chambers and the geological conditions of the shaft (including engineering and hydrogeo-logical conditions) are proposed. By combining specific analyses of shaft-related chambers, rock distribution patterns, and wa-ter content in the main and auxiliary shafts of a particular mine, along with insights from neighboring mine shaft construction experiences, an optimized frozen depth plan for the shaft lining are proposed. The advantages and disadvantages are analyzed, and a technical and economic comparison are performed. The research methodology can provide as a technical reference for determining shaft lining frozen depths under similar geological conditions.