[1] |
.
The Optimized Designing For Width of Mining And Coal Pillar For Solid Backfill Strip Mining
[J]. , 2019, 51(6): 0-0.
|
[2] |
.
Study on the reasonable section coal pillar width for fully mechanized caving face with hard roof and extra-thick coal seam
[J]. COAL ENGINEERING, 2019, 51(5): 43-47.
|
[3] |
.
Discussion on crossing ditch mining design of ultra thin bedrock shallow buried coal seam mining
[J]. COAL ENGINEERING, 2019, 51(3): 9-12.
|
[4] |
.
[J]. COAL ENGINEERING, 2018, 50(11): 17-24.
|
[5] |
.
[J]. COAL ENGINEERING, 2018, 50(5): 29-30.
|
[6] |
.
Experimental study on stability of pillar in upward mining in pillar mined out area
[J]. COAL ENGINEERING, 2018, 50(4): 5-9.
|
[7] |
.
Study on Characteristic Analysis and Construction Technology of Underground Drilling in Shendong Mining Area
[J]. COAL ENGINEERING, 2018, 50(1): 31-35.
|
[8] |
.
Study on Size of Section Coal Pillar in Gently Inclined and Extra-thick Coal Seam
[J]. COAL ENGINEERING, 2017, 49(10): 38-42.
|
[9] |
.
Study on the Reasonable Width of the Narrow Coal Pillar of Roadway in Gob Entry Driving of Face-mining
[J]. COAL ENGINEERING, 2017, 49(9): 36-39.
|
[10] |
.
Surrounding rock failure characteristics and asymmetric support control technology of narrow coal pillar roadway along goaf
[J]. COAL ENGINEERING, 2017, 49(7): 48-51.
|
[11] |
.
Characteristics of surrounding rock stress and Supporting in Mining Face Surrounded by Gobs
[J]. COAL ENGINEERING, 2017, 49(7): 103-105.
|
[12] |
.
The Reasonable Design of Narrow Pillar in Fully Mechanized Island Mining Working Face
[J]. COAL ENGINEERING, 2017, 49(6): 9-12.
|
[13] |
.
Study of Open-off Cut Oblique Design and Process of Leveling at the Beginning Mining of Fully Mechanized Working Face
[J]. COAL ENGINEERING, 2017, 49(6): 53-55.
|
[14] |
.
The negative pillar design technology of stagger gateroad mining method and its application
[J]. COAL ENGINEERING, 2017, 49(5): 1-3.
|
[15] |
.
Reasonable location of the roadway and the technology of surrounding rock control in isolated coal pillar
[J]. COAL ENGINEERING, 2017, 49(5): 11-14.
|