| [1] 杨阳,王鹏江,吉晓冬,等. 基于模糊数学的掘进机截割头转速分档预测方法[J]. 煤炭工程,2022,54(02): 172-176.[2] 张兰胜,赵元宇,田劼,等. 实际工况下的掘进机截割头载荷谱研究[J]. 煤炭工程,2016,48(01):133-135.[3] 赵国刚,毛新宇,陈洪玉,等.采煤机低合金高强韧性铸钢截齿的研究[J]. 煤炭学报,1998,23(3):314-317.[4] 孙玉宗.等离子熔覆高耐磨无火花本安型镐型截齿研究[J]. 煤炭工程,2009(7):102-104.[5] X. Li, B. Huang, G. Ma, et al. Study on roadheader cutting load at different properties of coal and rock[J]. The Scientific World Journal, 2013, 2013(11):1-8.[6] O. Acaroglu, H. Ergin. The effect of cutting head shapes on roadheader stability[J]. Mining Technology, 2005, 114(3): 140-146.[7] X. Y. Li, Y. G. Lv, S. B. Jiang, et al. Effects of spiral line for pick arrangement on boom type roadheader cutting load[J]. International Journal of Simulation Modelling, 2016, 15(1):170-180.[8] A. W. Khair. Research and innovations for continuous miner’s cutting head for efficient cutting process of rock/coal[J]. Department of Mining Engineering, West Virginia University, Morgantown, USA, 2001, 17:45-55.[9] D. Zhang, S. Liu, J. Jia. Influence of motion parameters on cutting performance of boom-type roadheader during the swing cutting[J]. Arabian Journal for Science and Engineering, 2021, 46(9):4387-4397.[10] Q. Liu, C. Lu, T. Liu, et al. Adaptive cutting control for roadheaders based on performance optimization[J]. Machines, 2021, 9(3):46.[11] A. Van Horenbeek, J. Buré, D. Cattrysse, et al. Joint maintenance and inventory optimization systems: A review[J]. International Journal of Production Economics, 2013, 143(2):499-508.[12] W. Wang. A stochastic model for joint spare parts inventory and planned maintenance optimisation[J]. European Journal of Operational Research, 2012, 216(1):127-139.[13] F. Zhao, X. Liu, R. Peng, et al. Joint optimization of inspection and spare ordering policy with multi-level defect information[J]. Computers and Industrial Engineering, 2020, 139(1):1-16.[14] 林名驰,钟强晖,李大伟. 不可修复产品的组合维修和备件供应策略[J]. 系统工程与电子技术,2020,42(06): 1417-1423.[15] A. Heyduk, J. Joostberens. Automatic control of roadheader cutting head speed and load torque[C]. IOP Conference Series: Earth and Environmental Science. IOP Publishing, 2020, 609(1):1-8.[16] O. Z. Hekimoglu. Investigations into tilt angles and order of cutting sequences for cutting head design of roadheaders[J]. Tunnelling and Underground Space Technology, 2018, 76(6):160-171.[17] G. G?kdere, Ng. H. K. Tony. Time-dependent reliability analysis for repairable consecutive-k-out-of-n: F system[J]. Statistical Theory and Related Fields, 2022, 6(2):139-147.[18] P. Pascual-Ortigosa, E. Sáenz-de-Cabezón, H. P. Wynn. Algebraic reliability of multi-state k-out-of-n systems[J]. Probability in the Engineering and Informational Sciences, 2021, 35(4):903-927.[19] 王想.纵轴式掘进机截割头截齿工作角度的确定及工艺实现[J].煤炭工程,2013(9):3.[20] 王海舰,黄梦蝶,高兴宇,等.考虑截齿损耗的多传感信息融合煤岩界面感知识别[J].煤炭学报,2021,46(6): 1996-2008. |