赵各庄矿极复杂区域保护煤柱留设数值模拟研究

doi:10.11799/ce201601030

Abstract

CLC Number:

TD822+.3

0
/ / Recommend

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.coale.com.cn/EN/10.11799/ce201601030

http://www.coale.com.cn/EN/Y2016/V48/I1/103

[1]屠洪盛，屠世浩，白庆升等．急倾斜煤层工作面区段煤柱失稳机理及合理尺寸［J］．中国矿业大学学报，2013，42(1):6-12．
[2]左建平，赵洪宝，杨建立等．大采高综放开采煤岩体冒落规律数值模拟研究［J］．煤炭科学技术，2013，41(1):56-59．
[3]尹尚先，王尚旭.陷落柱防水煤柱留设对围岩变形影响的数值模拟[J].煤炭学报，2000，31(2):179-182.
[4]Wu Qiang，Wang Minyu,Wu Xiong.Investigations of groundwater bursting into coal mine seam floors from fault zones[J].International Journal of Rock Mechanics and Ming Seience，2004，41(4):557-571.
[5]李见波，陈新明，贾明奎.断层上下盘采动活化突水数值模拟研究[J].煤炭工程，2012（6）：86-88.
[6]涂敏，桂和荣，李明好等.厚松散层及超薄覆岩厚煤层防水煤柱开采试验研究[J].岩石力学与工程学报，2004,23(20):3494-3497.
[7]戚春前.开滦赵各庄矿深部地应力特征研究[J]，煤炭技术，2008，27（10）：130-132.
[8]钱鸣高，石平五，许家林.矿山压力与岩层控制[M].徐州：中国矿业大学出版社，2010.
[9]冯本超，洪允和.正断层上盘防水煤柱合理宽度的研究[J].中国矿业大学学报，1993，22（3）:117-119.
[10]牛心刚，张永将，马海峰.采动和强承压水作用下大倾角断层防水煤柱宽度研究[J].煤炭科学技术，2014，42增（4）：75-77.
[11]刘鸿文主编.材料力学(上册).北京:人民教育出版社，1979.
[12]李金凯等著.矿井岩溶水防治[M].北京:煤炭工业出版社，1990
[13]李建民，朱斌，武强.赵各庄矿大倾角煤层综放开采突水条件的力学机理分析[J].煤炭学报，2007，32（5）:453-457.
[14]杨帆.急倾斜煤层采动覆岩移动模式及机理研究[D]；辽宁工程技术大学，2006年：30-46.
[15]陈仲颐，周景星，王洪瑾.土力学[M].清华大学出版社：北京1994:280-281.
[16]张华兴，郭惟嘉.“三下”采煤新技术[M].徐州：中国矿业大学出版社，2008.

Numerical research of steep coal seam mining coal pillar width under the goaf in the extremely complex area

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	. Study on the reasonable section coal pillar width for fully mechanized caving face with hard roof and extra-thick coal seam [J]. COAL ENGINEERING, 2019, 51(5): 43-47.
[2]	. [J]. COAL ENGINEERING, 2018, 50(5): 29-30.
[3]	. Experimental study on stability of pillar in upward mining in pillar mined out area [J]. COAL ENGINEERING, 2018, 50(4): 5-9.
[4]	. Study on the Reasonable Width of the Narrow Coal Pillar of Roadway in Gob Entry Driving of Face-mining [J]. COAL ENGINEERING, 2017, 49(9): 36-39.
[5]	. Surrounding rock failure characteristics and asymmetric support control technology of narrow coal pillar roadway along goaf [J]. COAL ENGINEERING, 2017, 49(7): 48-51.
[6]	. The Reasonable Design of Narrow Pillar in Fully Mechanized Island Mining Working Face [J]. COAL ENGINEERING, 2017, 49(6): 9-12.
[7]	. The negative pillar design technology of stagger gateroad mining method and its application [J]. COAL ENGINEERING, 2017, 49(5): 1-3.
[8]	. Research on rational width of coal pillar and its optimization design with thick seam in fully-mechanized working face [J]. COAL ENGINEERING, 2017, 49(3): 8-10.
[9]	. Research of reamer-pillar stability in Changlebao mine [J]. COAL ENGINEERING, 2017, 49(3): 7-74.
[10]	. Rational width of narrow coal pillar based on the main roof’s hanging roof length [J]. COAL ENGINEERING, 2017, 49(2): 10-13.
[11]	. Width determination of plastic zone of roadway coal pillar based on parabolic intensity criterion [J]. COAL ENGINEERING, 2016, 48(12): 83-86.
[12]	. Research on The Reasonable Size of Narrow Coal Pillar in The Three-soft thick Seam of Fully Mechanized Working Face [J]. COAL ENGINEERING, 2016, 48(9): 64-67.
[13]	. Study and Application of the Reasonable Narrow Coal Pillar Size of Driving Roadway Along Goaf with Deep Steep [J]. COAL ENGINEERING, 2016, 48(7): 11-14.
[14]	. Study on Safety Coal and Rock Pillar Designfor 11020 Coal Face in Zhaogu No.2 Mine [J]. COAL ENGINEERING, 2016, 48(6): 8-11.
[15]	. Simulation analysis of Influences on the Section Coal Pillar Size to the Overburden Strata Migration [J]. COAL ENGINEERING, 2016, 48(4): 1-4.