|
参考文献:
|
[1] |
潘永泰,王保强。 分级破碎机转速的断裂动力学分析[J]。选煤技术. 2003(6):79-81。
|
[2] |
潘永泰,路迈西。 大处理能力分级破碎设备的研究及应用[J]。选煤技术,2005 (1):12-15。
|
[3] |
王勖成。有限单元法[M].北京:清华大学出版社,2003:5-6.
|
[4] |
王保强. SSC大处理能力分级破碎机破碎齿应力分布仿真研究[J]. 煤炭工程, 2011(5):116-118.
|
[5] |
王宏迪. 双齿辊破碎机工作参数与破碎机理数值模拟研究[D].吉林大学, 2017.
|
[6] |
Cundall P. A. A computer model for simulating progressive large scale movement in block rock system[J]. Symposium ISRM, 1971, Proc 2: 129-136.
|
[7] |
冯启飞.基于离散元理论的旋回破碎机破碎性能分析及腔体优化[D].湖南大学,2014.
|
[8] |
胡国明.颗粒系统的离散元素法分析仿真[M].武汉: 武汉理工大学出版社, 2010: 1-2.
|
[9] |
J. Li, C. Webb, S.S. Pandiella. Discrete particle motion on sieves-a numerical study using the DEM simulation[J]. Powder Technology, 2003, 133(1): 190-202.
|
[10] |
Manoj Khanal, Wolfgang Schubert, and Jürgen Tomas. Crack Analysis in Single Plate Stressing of Particle Compounds[J]. ICCS 2004,LNCS 3037,2004:364~371.
|
[11] |
B. K. Mishra, C. Thornton,Impact breakage of a particle agglomerates[J]. Int. J. Miner.Process,2001 (61) : 225~239.
|
[12] |
H. Haddad,M. Guessasma,J. Fortin. Heat transfer by conduction using DEM–FEM coupling method[J]. Computational Materials Science,2014,01(81):339-347.
|
[13] |
A. Bagherzadeh Kh,A.A. Mirghasemi,S. Mohammadi. Numerical simulation of particle breakage of angular particles using combined DEM and FEM[J]. CPowder Technology,2011,10(205):15-29.
|
[14] |
Wei Wang,Yong Liu,Guiqing Zhu,Kun Liu. Using FEM–DEM coupling method to study three-body friction behavior[J]. Wear,2014,10(318):114-123.
|
[15] |
Mark Michael,Frank Vogel,Bernhard Peters. DEM–FEM coupling simulations of the interactions between a tire tread and granular terrain[J]. Computer Methods in Applied Mechanics and Engineering,2015,1(289):227-248.
|
[16] |
H. Haddad,M. Guessasma,J. Fortin. A DEM–FEM coupling based approach simulating thermo mechanical behavior of frictional bodies with interface layer[J]. International Journal of Solids and Structures,2016,01(81):203-218.
|
[17] |
曾攀. 有限元分析及应用 [M]. 北京: 清华大学出版社,2004.
|
[18] |
李向阳,运红丽,吴林峰. 对辊式破碎机中辊子的有限元分析 [J].水利电力机械,2007,( 5) : 19 ~ 21.
|