煤炭工程 ›› 2015, Vol. 47 ›› Issue (4): 38-40.doi: 10.11799/ce201504013

• 施工技术 • 上一篇    下一篇

黄岩汇煤矿15107孤岛工作面巷道控制技术

王宏伟   

  1. 中国矿业大学(北京)
  • 收稿日期:2014-10-20 修回日期:2014-12-25 出版日期:2015-04-10 发布日期:2015-04-10
  • 通讯作者: 王宏伟 E-mail:hongwwang@163.com
  • 基金资助:
    国家重点基础研究发展规划(973)项目(2010CB226801);中国矿业大学煤炭资源与安全开采国家重点实验室开放基金项目资助;中央高校基本科研业务费专项资金项目

Roadway Control Technology of 15107 Island Coal Face in Huangyanhui Coal Mine

  • Received:2014-10-20 Revised:2014-12-25 Online:2015-04-10 Published:2015-04-10

摘要: 以黄岩汇煤矿15107孤岛工作面为工程背景,分析了巷道围岩变形特征,提出了锚带网索综合控制技术。监测表明:超前工作面120~180m,回采对巷道变形影响较小;超前工作面70~120m,回采对巷道的影响逐步显现;超前工作面0~20m为剧烈影响期。监测期间巷道顶底移近量为886mm,以底鼓为主,两帮变形量达到1164mm,以煤柱帮为主。顶板离层监测表明回采阶段锚固区内离层较小。

关键词: 孤岛工作面, 锚带网索, 巷道控制, 离层

Abstract: This paper analyzed the roadway deformation characteristics and put forward anchor-belt-net-cable combined support technology, taking 15107 island coal face of Huangyanhui Coal Mine for engineering background. The results of the field test show that mining impact on the roadway deformation is small at 120m to 180m ahead of the coal face. When the distance reaches 70m to 120m, the impact of mining on the roadway appears gradually. The mining impact on the roadway deformation becomes severe when the distance is 0m to 20m. During the observation period, the roof to floor deformation of the roadway is 886mm and it is mainly caused by floor heave. The two side deformation is 1164mm, and it is mainly occurred on the side of coal pillar. The floor separation monitoring shows that the separation in the anchorage zone is small during mining influence, and it also provide a reference for the roadway support with similar conditions.

Key words: island coal face, anchor-belt-net-cable support technology, control technology, separation

中图分类号: