煤炭工程 ›› 2016, Vol. 48 ›› Issue (1): 10-13.doi: 10.11799/ce201601003

• 设计技术 • 上一篇    下一篇

黑岱沟露天矿拉斗铲挖掘作业方式研究

孙健东   

  1. 中国矿业大学(北京)
  • 收稿日期:2015-06-05 修回日期:2015-07-16 出版日期:2016-01-10 发布日期:2016-02-01
  • 通讯作者: 孙健东 E-mail:sjd_xx@126.com

Research on dragline rational operation mode of Heidaigou Surface Mine

  • Received:2015-06-05 Revised:2015-07-16 Online:2016-01-10 Published:2016-02-01

摘要: 为提高拉斗铲作业效率、降低作业成本,从刷帮作业半径、最小挖掘半径、最大合理挖掘半径三个方面对拉斗铲作业半径进行了分析,并根据8750-65型拉斗铲的设备参数与现场具体作业条件,对拉斗铲初始状态、反向移设后、单向推进、往返推进等各类作业情况的作业方式进行了推演,得出了台阶高度、挖掘作业时移设距离、移设步数、推进距离等参数之间的关系,最终推荐黑岱沟露天矿8750-65型拉斗铲采用“往返推进式”作业方式。

关键词: 拉斗铲, 作业方式, 挖掘半径, 往返推进式, 单向推进式

Abstract: Dragline rational operation mode was studied to improve the efficiency and reduce the cost. Dentified dragline excavation radius into end-slope leveling radius, minimum excavation radius and maximum rational excavation radius seperately. Based on 8750-65 dragline parameters and on-site operation conditions, paper deduced dragline’s kinds of operation mode including initial state, reverse shifting, unidirectional advancing, round trip advancing, etc., concludes the relations of working bench height, shifting distance, shifting steps and advancing distance, recommends 8750-65 dragline apply roundtrip advacing mode. The conclusion provides accordance to the formation of standard dragline operation mode and is of great help to guide the design and improvement of blasting, striping and mining, providing detailed analysis method and theoretical accordance.

中图分类号: