煤炭工程 ›› 2016, Vol. 48 ›› Issue (2): 53-55.doi: 10.11799/ce201602017
• 施工技术 • 上一篇 下一篇
王本猛
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
Received:
Revised:
Online:
Published:
摘要: 为实现筒仓群分区段施工,达到减少施工周期的目的,以新矿公司洗煤厂筒仓群中的3号仓(第二区段)的分区段施工为背景,分析研究了分区段滑模施工的工艺,并通过改进液压滑模系统,将滑模的操作平台改造成悬吊平台,在支撑杆的基础上增加吊杆、滑轨和滑轮等技术措施保证分区段滑膜技术顺利施工。实践结果表明,采用分区段滑模技术可以大幅缩短工期,达到了预期的效果。
关键词: 选煤厂, 筒仓群, 分区段滑模, 液压滑膜系统, 悬吊平台
Abstract: The silo group is a combination of a plurality of silos. The silo is connected with each other, and the time limit for the construction of a section of a section of a conventional method is longer. For the segmental construction, reduce the construction period, through the analysis and research of technology, take section sliding formwork construction technology, to improve the technology of hydraulic sliding formwork system, sliding template operation platform transformed into suspension platform, on the support rod based on increased boom, a slide rail and a pulley technical measures. The practical results show that the method can shorten the time limit of the construction period, and achieve the expected results.
Key words: Silo, sliding mode, construction , technology
中图分类号:
TD223
王本猛. 筒仓群工程分区段滑模施工技术[J]. 煤炭工程, 2016, 48(2): 53-55.
0 / / 推荐
导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks
链接本文: http://www.coale.com.cn/CN/10.11799/ce201602017
http://www.coale.com.cn/CN/Y2016/V48/I2/53