煤炭工程 ›› 2016, Vol. 48 ›› Issue (4): 74-77.doi: 10.11799/ce201604023

• 研究探讨 • 上一篇    下一篇

工作面推进速度对地表移动变形的影响研究

廉旭刚1,郭博婷2,胡海峰2   

  1. 1. 太原理工大学
    2. 太原理工大学矿业工程学院
  • 收稿日期:2015-10-28 修回日期:2015-11-26 出版日期:2016-04-10 发布日期:2016-04-18
  • 通讯作者: 郭博婷 E-mail:875014519@qq.com

Study on the influence of working face advancing speed on surface movement and deformation

  • Received:2015-10-28 Revised:2015-11-26 Online:2016-04-10 Published:2016-04-18

摘要: 为了探究工作面推进速度对地表移动变形的影响,利用开采沉陷概率积分预计模型,并结合克诺特(Knothe)时间影响函数,对同一地质采矿条件下不同推进速度(2m/d和5m/d)时的地表移动变形情况进行分析研究,研究结果表明,推进速度与地表移动曲线的动态峰值成反比,即提高推进速度能够降低开采对地表的破坏,但无法降低开采对工作面切眼与终采线上方地表的破坏,研究结果对矿区开采沉陷防治具有重要的指导意义。

关键词: 工作面推进度, 开采沉陷, 时间影响函数, 地表移动变形

Abstract: In order to study the influence of the ground movement deformation caused by the advancing speed of the working face, through the application of probability integral prediction model of mining subsidence which combined with the time influence function of Knothe, the ground movement deformation of speeds 5m/d and 2m/d were studied and analyzed under a certain geological mining condition. It is found that the dynamic peak of surface movement curve is inversely proportional to the advancing speed, which is to improve the advancing speed, which can reduce the surface damage, but cannot reduce the destruction of the surface of the first cut and the stop line. The results are important for the prevention and control of mining subsidence.

中图分类号: