煤炭工程 ›› 2016, Vol. 48 ›› Issue (6): 83-86.doi: 10.11799/ce201606026

• 生产技术 • 上一篇    下一篇

地震波层析成像技术在冲击地压防治中的应用

孔寅1,曹民远2,马星3,石海洋4   

  1. 1. 山东科技大学土木工程与建筑学院
    2. 神华新疆能源有限公司
    3. 中国矿业大学(北京)
    4. 中国矿业大学(北京)力学与建筑工程学院
  • 收稿日期:2015-09-30 修回日期:2015-12-27 出版日期:2016-06-10 发布日期:2016-06-30
  • 通讯作者: 马星 E-mail:786134771@qq.com

Application of seismic CT technology in the prevention of rockburst

  • Received:2015-09-30 Revised:2015-12-27 Online:2016-06-10 Published:2016-06-30

摘要: 文章首先介绍了地震波层析成像技术的应用原理和使用方法,以PASAT-M探测系统为平台,在现场实测数据基础上,通过计算机反演得到探测区域冲击危险性指数分布图,进而分析冲击危险所处区域,以及煤岩体内应力分布情况,据此可以评价冲击地压防治措施实施效果。基于以上原理,探测乌东南采区+475水平B1+2煤层处于弱冲击等级,其中边界线两侧局部位置由于煤柱的存在,冲击危险性指数K值较高,达到0.5~0.75。因此,采用大孔径钻孔和煤层注水卸压,同样采用PASAT-M探测系统进行卸压措施评价,结果表明K值基本均在0.3以下,整体上冲击危险性明显降低。这表明地震波CT技术可满足现场对冲击危险性评价的需要,其结果实用可靠,为类似工程应用提供借鉴。

关键词: 地震波CT技术, 冲击危险性, 冲击地压, 防治措施

Abstract: Abstract First of all, the application mechanism and method of seismic CT technology are introduced. Then the rockburst risk index distribution figures can be gained by computer inversion method based on the field measured data combining with the rock burst tendency of B1+2 at level of +475m in the WuDong coal mine, from which it can show the high rate area of rock burst and the changing process of stress in the coal and rock mass as well as evaluate the effect of prevention measures for the rock burst. The results show that the CT technique of seismic wave can meet the field application requirements with the reliable results.

Key words: Keywords Seismic CT technology, the risk of coal mass burst, rock burst, controlling measure

中图分类号: