煤炭工程 ›› 2018, Vol. 50 ›› Issue (9): 96-100.doi: 10.11799/ce201809026

• 研究探讨 • 上一篇    下一篇

基于Aquifer Test的底板放水试验参数计算与评价研究

田增林1,黄选明2,曹海东3,李德彬3   

  1. 1. 煤炭科学研究总院西安研究院
    2. 中煤科工集团西安研究院有限公司水文地质研究所
    3. 中煤科工集团西安研究院有限公司
  • 收稿日期:2017-12-18 修回日期:2018-04-18 出版日期:2018-09-20 发布日期:2018-12-18
  • 通讯作者: 田增林 E-mail:190176148@qq.com

Parameters’ calculation and evaluation in dewatering test at coalbed floor based on the Aquifer Test software

  • Received:2017-12-18 Revised:2018-04-18 Online:2018-09-20 Published:2018-12-18

摘要: 为了提高放水试验参数计算的精度和速度,基于地面抽水试验和井下底板放水试验在水文地质参数计算中的相似性,将抽水试验中常用的Aquifer Test求参软件用于宁东灵新煤矿底板承压含水层放水试验的参数求解中,分别采用了标准曲线对比法、直线图解法和水位恢复法对渗透系数K和贮水系数μ*进行了拟合求解,并和手工方式下的计算过程及结果进行了对比和分析。结果显示,采用手工和软件计算所得参数的平均值总体上无较大差异,但手工方式在不同方法下的拟合结果存在较大的离散性和不确定性,而Aquifer Test软件由于融合了人工拟合和机器拟合两者的优势,所得结果精度显著高于前者,同时较前者具有操作过程简易、计算结果同步等优点,适合在有多个观测孔的底板放水试验参数计算中推广应用。

关键词: Aquifer Test, 底板放水试验, 水文地质参数, 渗透系数, 贮水系数

Abstract: In order to improve the parameters’ accuracy and speed in dewatering test,based on the similarity of hydrogeological parameters’ calculation in pumping test and dewatering test at coalbed floor, Aquifer Test software that used usually in pumping test was applied in one dewatering test at coalbed floor carried out in a colliery of Ningdong county. Through Theis fitting curve, Cooper-Jacob linear graphic and Theis recovery, hydraulic conductivity K and storage coefficient μ*were calculated and compared between Aquifer test and traditional handwork. Results showed that there was a slight difference of the results between two ways, but the results from handwork were relatively discrete. By contrast, due the Aquifer Test incorporated the advantages of hand fitting and computer fitting, led to a more precise result. Meanwhile, the software is more convenient in operation, simultaneous and time-saving in calculation and it’s worth to be promoted and applied in the hydrogeological parameters’ calculation of dewatering test at coalbed floor, especially in which there are many observation boreholes.

中图分类号: