煤炭工程 ›› 2020, Vol. 52 ›› Issue (2): 80-85.doi: 10.11799/ce202002018

• 生产技术 • 上一篇    下一篇

三产品干扰床分选机研究与应用

陈力攻,李延锋,李小可,石玉山,朱昆阳   

  1. 1. 中国平煤神马集团平顶山朝川焦化有限公司
    2. 中国矿业大学化工学院
  • 收稿日期:2019-07-26 修回日期:2019-10-28 出版日期:2020-02-10 发布日期:2020-05-11
  • 通讯作者: 陈力攻 E-mail:ccjhclg697198@163.com

Applied research and Industrial Practice of Three-product Fluidized Bed Separator

  • Received:2019-07-26 Revised:2019-10-28 Online:2020-02-10 Published:2020-05-11

摘要: 随着机械化程度的提高,原煤中的煤泥含量越来越大,多数选煤厂存在粗煤泥分选精度不高、尾矿跑煤严重等问题。通过对大煤泥量原煤进行筛分试验和干扰床分选试验,分析了不同粒级的粗煤泥干扰沉降状态差异。同时针对传统干扰床分选的局限性,提出用两次分选提高精度的技术路线,研制了三产品干扰床试验机。工业实践结果表明:粗煤泥经过三产品干扰床分选后,大大提高了粗煤泥分选精度,粗精煤产品灰分降低了3%|同时有效避免了尾矿跑煤,提高了精煤回收率。

关键词: 三产品干扰床, 粗煤泥分选, 两次分选, 尾矿跑煤

Abstract: With the improvement of mechanization, the content of slime in raw coal is increasing. There are some problems in most coal preparation plants, such as low separation accuracy of coarse slime and serious tailings running away from coal. Through screening test and interference bed separation test of raw coal with large slime volume, the difference of interference settling state of coarse slime with different particle size is analyzed. At the same time, aiming at the limitation of traditional jamming bed sorting, the technical route of twice sorting to improve the accuracy is put forward, and a three-product jamming bed testing machine is developed. The results of industrial practice show that the separation accuracy of coarse slime is greatly improved after three-product interference bed separation, and the ash content of coarse and concentrate products is reduced by 3%. At the same time, the tailings are effectively avoided and the recovery rate of concentrate is improved.

中图分类号: