煤炭工程 ›› 2021, Vol. 53 ›› Issue (1): 110-114.doi: 10.11799/ce202101023

• 研究探讨 • 上一篇    下一篇

反井钻机小倾角扩孔排渣泥岩下落运动学特征机理研究

彭鸣1,刘志强1,荆国业2   

  1. 1. 北京中煤矿山工程有限公司
    2. 煤炭科学研究总院建井研究分院
  • 收稿日期:2020-09-19 修回日期:2020-10-15 出版日期:2021-01-20 发布日期:2021-04-27
  • 通讯作者: 彭鸣 E-mail:784351815@qq.com

Research on the characteristic raise boring machine of mudstone with small dip angle reaming and slagging

ming PENG 2,   

  • Received:2020-09-19 Revised:2020-10-15 Online:2021-01-20 Published:2021-04-27
  • Contact: ming PENG E-mail:784351815@qq.com

摘要: 反井钻井法采用的是反向钻进破岩方式,钻头破碎形成的岩渣靠自重下落,不存在重复破碎现象,破岩效率高,钻进速度快。在小倾角反井施工条件下,钻头扩孔时岩渣无法像竖直或大倾角施工条件下靠自重稳定下落。论文分别应用饱和土在运动方向的平衡公式和斯氏改进公式计算与试验进行对比,结果显示了理论计算与试验结果相吻合,证明了理论的准确性。

关键词: 反井钻机, 泥岩, 排渣, 抗剪强度, 启动流速

Abstract: The raise boring machine uses reverse drilling to break the rock. The rock slag formed by the crushing of the drill bit falls by its own weight, there is no repeated crushing phenomenon, the rock breaking efficiency is high, and the drilling speed is fast. Under the condition of a raise shaft with a small inclination angle, the slag cannot fall stably by its own weight when the drill bit is reamed in a vertical or large angle. The thesis uses the balance formula of the saturated soil in the direction of motion and the improved formula of Scherzler to compare calculations and experiments. The results show that the theoretical calculations are consistent with the experimental results and prove the accuracy of the theory.