煤炭工程 ›› 2013, Vol. 45 ›› Issue (6): 106-107.doi:
• 研究探讨 • 上一篇 下一篇
林群仙,李少和
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
Received:
Revised:
Online:
Published:
摘要: 本文对浙江上塘河桥工程的钻孔灌注桩未注浆桩和注浆桩载荷实验对比分析,并通过与单桩载荷对比分析,确定有限元ANSYS的模型参数,以此单桩的ANSYS有限元模型,分别对未注浆桩、注浆桩的注浆体尺寸不同情况下承载力大小的对比分析,并得出关于钻孔灌注桩桩端后注浆承载力的提高实质是破坏模式的转变。
关键词: 钻孔灌注桩, 注浆, 模量, 承载力
Abstract: This paper on the zhejiang shangtang bridge engineering of the cast-in-place pile static load tests and grouting pile load the contrast analysis,And through the and single pile load contrast analysis, finite element model parameters determined ANSYS, For grouting pile, respectively not grouting pile of grouting body size under different conditions of the size of the bearing capacity of the comparison and analysis, And that bored perfusion pile on the bearing capacity of the essence improve after grouting is the transformation of the failure mode.
Key words: Bored pile, grouting, Module, Bearing capacity
林群仙,李少和. 钻孔灌注桩桩端后注浆承载性状的有限元分析[J]. 煤炭工程, 2013, 45(6): 106-107.
0 / / 推荐
导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks
链接本文: http://www.coale.com.cn/CN/
http://www.coale.com.cn/CN/Y2013/V45/I6/106