矿鸿操作系统在智能化综采工作面的应用研究

doi:10.11799/ce202303016

摘要/Abstract

摘要： 为了解决综采工作面中设备种类繁多、设备生产厂商不同导致的设备操作系统与数据协议不统一等诸多问题，以乌兰木伦煤矿12422综采面为例，对薄煤层综采面特点、设备布置情况进行分析，并结合煤矿智能化发展的相关指导要求，建立了井下5G通信网络，将矿鸿操作系统移植入薄煤层综采面设备。研究表明：该系统将设备之间的数据接口和数据协议标准进行了统一，实现了设备之间的互联、信息的互通，并且作业人员可以通过智能防爆手机实现对设备的掌控。矿鸿操作系统在12422薄煤层综采面的成功应用有效的提高了薄煤层的开采率和智能化水平。

关键词: 矿鸿操作系统, 薄煤层, 综采工作面, 智能化建设

Abstract: In order to solve many problems such as a wide variety of equipment and different equipment operating systems and data protocols caused by different equipment manufacturers in the process of intelligent construction of thin coal seam comprehensive mining face, taking the 12422 comprehensive mining face of Ulanmulun Coal Mine as an example, the characteristics and equipment layout of the comprehensive mining face of thin coal seam were analyzed, and combined with the relevant guidance requirements for the intelligent development of coal mines, an underground 5G communication network was established, the operating system of Kuang Hong was transplanted into the equipment of the comprehensive mining face of thin coal seam. The results show that the system unifies the data interface and data protocol standards between the equipment, realizes the interconnection between the equipment and the intercommunication of information, and the successful application of the Kuang Hong operating system in the comprehensive mining face of the 12422 thin coal seam not only improves the mining rate of the thin coal seam, but also enables operators to control the equipment through the intelligent explosion-proof mobile phone.

中图分类号:

TD823

张国恩, 严超超, 王毅颖. 矿鸿操作系统在智能化综采工作面的应用研究[J]. 煤炭工程, 2023, 55(3): 84-88.

参考文献

[1] 侯刚,王国法,张建安,等.1.1m坚硬薄煤层智能化开采关键技术及装备——以陕北侏罗纪煤田为例[J].煤炭科学技术,2022,50(03):224-231.
HOU Gang,WANG Guofa,ZHANG Jian’an,et al. Key technology and equipment of intelligent mining for 1.1 m hard and thin coal:Jurassic coalfield in Northern Shaanxi as an example [J]. Coal Science and Technology, 2022,50(03):224-231.
[2] 李刚.薄煤层工作面智能化成套装备关键技术研究[J].矿山机械,2020,48(07):5-10.
LI Gang. Research on key technology about complete set of intelligent equipment for workface of thin coal seam [J]. Mining & Processing Equipment, 2020,48(07):5-10.
[3] 赵可平.薄煤层综采自动化关键技术及应用研究[J].矿业装备,2020，10(05):24-25.
ZHAO Keping. Research on key technology and application of fully mechanized Mining Automation in Thin Coal Seam [J]. Mining Equipment,2020，10(05):24-25.
[4] 王强.薄煤层综采工作面智能巡检系统设计[J].煤炭技术,2020,39(12):122-125.
WANG Qiang. Design of Intelligent Inspection System for Fully Mechanized Face in Thin Coal Seam[J]. Coal Technology, 2020,39(12):122-125.
[5] 袁永,屠世浩,陈忠顺,等.薄煤层智能开采技术研究现状与进展[J].煤炭科学技术,2020,48(05):1-17.
YUAN Yong,TU Shihao,CHEN Zhongshun, et al. Current situation and development of intelligent mining technology for thin coal seams [J]. Coal Science and Technology, 2020,48(05):1-17.
[6] 黄超慧.薄煤层智能化工作面的建设及技术创新[J].中国煤炭工业,2020，36(05):56-58.
HUANG Chaohui. Construction and technology innovation of intelligent working face of thin coal seam [J]. China coal industry, 2020，36(05):56-58.
[7] 王国法. 煤矿智能化最新技术进展与问题探讨[J].煤炭科学技术,2022,50(01):1-27.
WANG Guofa. New technological progress of coal mine intelligence and its problems [J]. Coal Science and Technology, 2022,50(01):1-27.
[8] 苑林龙.薄煤层综采工作面智能化控制系统应用[J].能源与节能,2021，26(11):184-185+189.
YUAN Linlong. Application of Intelligent Control System in Fully Mechanized Mining Face of Thin Coal Seam [J]. Energy and Energy Conservation, 2021，26(11):184-185+189.
[9] 李健.薄煤层综采工作面智能化技术研究[J].能源与节能,2021，26(09):125-126.
LI Jian. Research on Intelligent Technology of Fully Mechanized Mining Face in Thin Seams [J]. Energy and Energy Conservation, 2021，26(09):125-126.
[10] 王永强,马召辉,杨文明,等.薄煤层智能成套综采设备选型[J].煤矿机械,2021,42(04):142-144.
Wang Yongqiang, Ma Zhaohui, Yang Wenming, et al. Type Selection of Intelligent Complete Set Fully Mechanized Mining Equipment in Thin Coal Seam[J]. Coal Mine Machinery, 2021,42(04):142-144.
[11] 梁椿豪.薄煤层工作面自动化控制仿真技术研究[J].煤矿机械,2021,42(12):47-51.
LIANG Chunhao. Research on Simulation Technology of Automatic Control in Thin Coal Seam Working Face [J]. Coal Mine Machinery, 2021,42(12):47-51.
[12] 刘春生,刘延婷,刘若涵,等.采煤机截割状态与煤岩识别的关联载荷特征模型[J].煤炭学报,2022,47(01):527-540.
LIU Chunsheng,LIU Yanting,LIU Ruohan, et al.. Correlation load characteristic model between shearercutting state and coal-rock recognition [J]. Journal of China Coal Society, 2022,47(01):527-540.
[13] 杨龙杰,王培强,石彦磊.薄煤层工作面智能化开采设备选型及控制系统的研究[J].山东煤炭科技,2022,40(05):15-17.
Yang Longjie,Wang Peiqiang,Shi Yanlei. Research on Selection and Control System of Intelligent Mining Equipment in Thin Coal Seam Working Face [J]. Shandong Coal Science and Technology, 2022,40(05):15-17.
[14] 李新华,贺海涛.“矿鸿”操作系统在神东矿区智能化建设中的探索[J].中国煤炭,2021,47(S1):7-13.
LI Xinhua;HE Haitao. Exploration of Mine Harmony OS in the intelligent construction of Shendong mining area [J]. China Coal, 2021,47(S1):7-13.
[15] 卜庆辉,赵龙,孙维耕,等.基于装煤效果优化的薄煤层综采工作面三机配套研究[J].煤矿机械,2021,42(09):145-147.
BU Qinghui,ZHAO Long,SUN Weigeng,et al. Study on Three Machines Matching of Fully Mechanized Mining Face in Thin Coal Seam Based on Coal Loading Effect Optimization [J]. Coal Mine Machinery, 2021,42(09):145-147.
[16] 吕沁军.薄煤层综采工作面自动化智能化巡检系统研究[J].当代化工研究,2021，21(13):56-57.
Lv Qinjun. Research on Automatic Intelligent Inspection System of Fully Mechanized Mining Face in Thin Coal Seam [J]. Modern Chemical Research, 2021，21(13):56-57.
[17] 武俊.黄白茨煤矿薄煤层工作面智能化控制系统的应用[J].煤炭科学技术,2021,49(S1):46-52.
WU Jun. Application of intelligent control system in thin seam coal face of Huangbaici Coal Mine [J]. Coal Science and Technology, 2021,49(S1):46-52.
[18] 庞军林,兰凯,马晓泽.伊泰宝山煤矿薄煤层智能化综采工作面建设和应用[J].煤炭科学技术,2021,49(S1):35-39.
PANG Junlin, LAN Kai, MA Xiaoze. Construction and application of the intelligent fully-mechanized mining face of thin coal seams in Yitai Baoshan Coal Mine [J]. Coal Science and Technology, 2021,49(S1):35-39.
[19] 孟小军.薄煤层综采工作面智能化控制系统应用[J].西部探矿工程,2021,33(08):149-150+152.
MENG Xiaojun. Application of intelligent control system in fully mechanized Mining face of Thin Coal Seam [J]. West-China Exploration Engineering, 2021,33(08):149-150+152.