下位煤层垂直布置煤柱尺寸优化分析

doi:10.11799/ce201403005

Abstract

Abstract:

To the multi coal layers of the mines, this paper researches the 10 m pillar abutment pressure distribution on pillars floor and roof, based on these three pillar sizes that lower pillar greater than or equal to, less than upper pillar were determined, and from three aspects to analysis each pillar on the influence of above pillar pressure relief degree, pillar peak pressure coefficient and at the bottom of the propagation depth. The results show the pillar pressure spread in different forms when in different pillar size combinations, single seam pillar pressure is "8" shape distribution in the roof and floor, however the vertical arrangement of the double seam pillar pressure in the floor with semi-elliptical transmission distribution. When pillar size less than upper pillar, the pillar pressure peak coefficient is low, floor propagation depth is smaller, and the above pillar pressure effect is better. The results for vertical arrangement pillar reasonable choose pillar size and promotion small coal pillar application to provide certain guiding significance.

Key words: abutment pressure, pillar, relief coefficient, concentration factor

CLC Number:

TD 322

0
/ / Recommend

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.coale.com.cn/EN/10.11799/ce201403005

http://www.coale.com.cn/EN/Y2014/V46/I3/13

References

[1] 施龙青,宋振骐. 采场底板突水条件及位置分析[J].煤田地质与勘探,1999,27(5):49-51.
SHI Long-qing,SONG Zhen-qi. A ANALYSES ABOUT THE CONDITIONS AND THE SITE OF WATER INRUSH FROM MINING FLOOR [J]. COAL GEOLOGY AND EXPLORATION,1999,27(5):49-51.
[2] 孟祥瑞,徐铖辉,高召宁,等. 采场底板应力分布及破坏机理[J].煤炭学报,2010,35(11): 1832-1836.
MENG Xiang-rui,XU Cheng-hui,GAO Zhao-ning,et al. Stress distribution and damage mechanism of mining floor [J]. JOURNAL OF CHINA COAL SOCIETY,2010,35(11): 1832-1836.
[3] 秦忠诚,王同旭. 深井孤岛综放面支承压力分布及其在底板中的传递规律[J]. 岩石力学与工程学报,2004,23(7):1127-1131.
Qin Zhong-cheng,Wang Tong-xu. ABUTMENT PRESSURE DISTRIBUTION AND ITS TRANSFER LAW IN FLOOR OF DEEP ISOLATED FULLY-MECHANIZED MINING FACES USING SUBLEVEL CAVING[J]. Chinese Journal of Rock Mechanics and Engineering,2004,23(7):1127-1131.
[4] 谢广祥,杨科,常聚才. 综放开采煤层支承压力分布规律现场实测分析[J]. 煤炭科学技术,2006,34(3):1-3.
XIE Guang-xiang,YANG Ke,CHANG Ju-cai. Analysis on site measurement of support pressure distribution law for seam of fully mechanized longwall top coal caving mining[J]. Coal Science and Technology,2006,34(3):1-3.
[5] 张华磊. 采场底板应力传播规律及其对底板巷道稳定性影响研究[D]. 徐州:中国矿业大学,2011．
ZHANG Hua-lei. Study on Stress Transmission Laws of Mining Floor and Its Influence on Stability of Floor Roadway[D]. Xuzhou: China University of Mining and Technology,2011.
[6] 朱术云,姜振泉,姚普,等. 采场底板岩层应力的解析法计算及应用[J]. 采矿与安全工程学报,2007,
24(2):191-194．
ZHU Shu-yun,JIANG Zhen-quan,YAO Pu,et al. Application of Analytic Method in Calculating Floor Stress of a Working Face[J]. Journal of Mining and Safety Engineering,2007,24(2):191-194.
[7] 翟新献. 深部开采煤柱载荷在底板岩层传递影响角的探讨[J]. 东北煤炭技术,1994(6):16-18．
ZHAI Xin-xian. DISCUSSION ON INFLUENCE ANGLE TRANSFERENCE OF DEEP MINING PILLAR LOAD IN FLOOR STRATA[J]. Coal Technology of Northcast China,1994(6): 16-18．
[8] 王旭宏,张绪言,张百胜,等. 煤柱集中载荷对不同错距巷道围岩应力的影响[J]. 煤炭工程,2009(8):84-86．
WANG Xu-hong,ZHANG Xu-yan，ZHANG Bai-sheng,et al. Concentrate loading of pillar and its effect on the tunnel surrounding rock stress of different location [J]. Coal Engineering,2009(8): 84-86．
[9] 钱鸣高,石平五. 矿山压力及其控制[M],徐州: 中国矿业大学出版社,2003: 218．
QIAN Ming-gao,SHI Ping-wu. Mine and rock pressure control [M]. Xuzhou: China mining university press,2003:218.

[1]	. The Optimized Designing For Width of Mining And Coal Pillar For Solid Backfill Strip Mining [J]. , 2019, 51(6): 0-0.
[2]	q 11. Research and Practice of Cutting Pole Protection for Narrow Coal Pillar in Thick Coal Seam Section of Changping Coal Mine [J]. COAL ENGINEERING, 2019, 51(5): 82-86.
[3]	. Research on the Technique of Gob-side Retaining and Shearer cutting Tunnel mining System in Nanliang Coal Mine [J]. COAL ENGINEERING, 2018, 50(8): 1-6.
[4]	. Instability Mechanism of Road Way in Proximity Underlying the Room Mining Pillars [J]. COAL ENGINEERING, 2017, 49(8): 103-104.
[5]	. The negative pillar design technology of stagger gateroad mining method and its application [J]. COAL ENGINEERING, 2017, 49(5): 1-3.
[6]	. Application of ISS transmission method and reflection method in detection of small structures [J]. COAL ENGINEERING, 2017, 49(5): 47-50.
[7]	. Research on Mining Technology and Rock Pressure Control of Gently inclined Boundary Coal in Continuous Miner [J]. COAL ENGINEERING, 2017, 49(2): 1-4.
[8]	. [J]. , 2017, 49(12): 0-0.
[9]	. [J]. COAL ENGINEERING, 2016, 48(5): 65-67.
[10]	. The Optimization Design of Pillar Longwall in Outburst Coal Seam [J]. COAL ENGINEERING, 2015, 47(9): 9-10.
[11]	. Research on Narrow Pillar Design for Roadway Driving Along Goaf of Short-distance Coal Seams Group [J]. COAL ENGINEERING, 2015, 47(8): 4-7.
[12]	. Study of Long Time Effect and Replacement Mining Method for Coal Pillar in the Strip Mining [J]. COAL ENGINEERING, 2015, 47(8): 57-59.
[13]	. Strata Pressure Behavior Law of Large Mining Depth and High Cutting Height Fully Mechanized mining Face of TinNan Coalmine [J]. COAL ENGINEERING, 2015, 47(8): 80-83.
[14]	. Study of Roof Control technology and rule of ground pressure when lower leaf fully mechanized workface going out top coal pillar of Close distance coal seams [J]. COAL ENGINEERING, 2015, 47(8): 84-87.
[15]	. [J]. COAL ENGINEERING, 2015, 47(8): 88-91.

The optimization analysis for pillar size of vertical arrangement in lower coal seams

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments