| [1] |
.
Application of regional stereo replacement technology in Gas and spontaneous combustion working face
[J]. COAL ENGINEERING, 2019, 51(5): 114-117.
|
| [2] |
.
Design and application effect analysis of the three-dimensional efficient gas extraction system in gob of fully mechanized caving face of the high gassy mine based on the technique of CFD simulation
[J]. COAL ENGINEERING, 2019, 51(4): 10-15.
|
| [3] |
.
Determination of high level borehole drilling parameters based on the law of roof large cycle and small cycle pressure
[J]. COAL ENGINEERING, 2019, 51(4): 34-37.
|
| [4] |
.
Research on Monitoring System of Coal Mine Gas Concentration Based on Fuzzy Intelligent Control
[J]. COAL ENGINEERING, 2019, 51(4): 80-84.
|
| [5] |
.
Research and application of gas control technology in long-distance excavation face
[J]. COAL ENGINEERING, 2019, 51(3): 71-73.
|
| [6] |
.
Optimal study of horizon position of high level gas drainage gateway in hard-roof mining face
[J]. COAL ENGINEERING, 2019, 51(3): 87-91.
|
| [7] |
.
Study on Gas-control of the 1206 fully Mechanized Coal Face in Si Ma Coal Mine
[J]. COAL ENGINEERING, 2019, 51(1): 60-63.
|
| [8] |
.
Application of gas drainage technology in High-level Directional Long drilling hole
[J]. COAL ENGINEERING, 2019, 51(1): 64-067.
|
| [9] |
.
Study on application of borehole flow method in investigation of borehole extraction radius in this coal seam
[J]. COAL ENGINEERING, 2019, 51(1): 68-72.
|
| [10] |
.
[J]. COAL ENGINEERING, 2018, 50(12): 66-68.
|
| [11] |
.
Study on Law of Cement Grout Osmotic Diffusion of Single Fracture Model
[J]. COAL ENGINEERING, 2018, 50(12): 103-106.
|
| [12] |
.
[J]. COAL ENGINEERING, 2018, 50(10): 106-108.
|
| [13] |
.
Study and application of joint support of anchorage cable and cable beam in steep inclined "Three Soft" coal seam roadway
[J]. COAL ENGINEERING, 2018, 50(9): 28-30.
|
| [14] |
.
Research on Goaf Gas Control using of L-shaped Well in 1301 Mining Face of Hudi Coal Mine
[J]. COAL ENGINEERING, 2018, 50(9): 59-62.
|
| [15] |
.
[J]. COAL ENGINEERING, 2018, 50(8): 61-64.
|
