极近距离下位煤层巷道合理布置与支护设计

doi:10.11799/ce201604003

Abstract

Abstract: Combined with the geological conditions of thefourth mine of Pingdingshan Coal Group,reasonable position of roadway for lower ofultra-close coal seam is studied by numerical simulation in this paper.The results show that the deformation of surrounding rock of roadway decreases with the increase of the inner stagger distance under different layers. The reasonable inner stagger distance of roadway is 30 m.According tothe surrounding rock control countermeasures of actively division support，the paper proposes a division support scheme of combined support withbolt belt wire cable shedwith space of coal layers as indicators.The field practiceshows that combined supporthas well controlled the deformation of surrounding rock.

CLC Number:

TD822

0
/ / Recommend

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.coale.com.cn/EN/10.11799/ce201604003

http://www.coale.com.cn/EN/Y2016/V48/I4/9

References

[1]张百胜.极近距离煤层开采围岩控制理论及技术研究[J].太原理工大学, 2008, :- [2]龚红鹏, 李建伟, 陈宝宝, 等.近距离煤层群开采覆岩结构及围岩稳定性研究[J].煤矿开采, 2013, 18(5):90-92 [3]张向阳, 常聚才.上下采空极近距离煤层开采围岩应力及破坏特征研究[J].采矿与安全工程学报, 2014, (04):506-511 [4] 贾韶华.近距离煤层下层煤双巷布置围岩变形规律研究[J].山西煤炭, 2013, (11):41-43 [5] 方新秋, 郭敏江, 吕志强.近距离煤层群回采巷道失稳机制及其防治[J]. 岩石力学与工程学报, 2009, 10:2059-2067. [6]刘洪涛, 赵志强, 张胜凯, 等.近距离煤层群围岩碎裂特征与裂隙分布关系[J]. 煤炭学报, 2015, 04:766-773. [7] 张守宝, 乔博阳, 郭晓辉, 等.极近距离下煤层巷道布置位置的理论计算[J]. 山东煤炭科技, 2013, 06:11-13. [8]张飞, 陈绍祥, 薛永生, 等.极近距离下位煤层采准巷道合理位置研究[J]. 煤炭技术, 2015, 04:86-89. [9]张随喜, 张东升, 王旭锋, 等.曹村矿近距离煤层群下位煤层巷道布置分析[J]. 煤炭工程, 2012, 01:46-48. [10] 张炜, 张东升, 陈建本, 等.极近距离煤层回采巷道合理位置确定[J]. 中国矿业大学学报, 2012, 02:182-188. [11] 蒋升, 孔杰, 钟宜涛, 等.极近距离煤层下分层开采矿压显现规律[J]. 煤矿安全, 2012, 12:65-68. [12] 朱涛, 张百胜, 冯国瑞, 等.极近距离煤层下层煤采场顶板结构与控制[J]. 煤炭学报, 2010, 02:190-193. [13] 计平, 查文华, 宋新龙.极近距离煤层联合开采矿压显现规律研究[J]. 煤炭科学技术, 2014, 12:8-11+15. [14] 孙春东, 杨本生, 刘超.1.0m极近距离煤层联合开采矿压规律[J]. 煤炭学报, 2011, 09:1423-1428.

[1]	. The Optimized Designing For Width of Mining And Coal Pillar For Solid Backfill Strip Mining [J]. , 2019, 51(6): 0-0.
[2]	. Study on the reasonable section coal pillar width for fully mechanized caving face with hard roof and extra-thick coal seam [J]. COAL ENGINEERING, 2019, 51(5): 43-47.
[3]	. Discussion on crossing ditch mining design of ultra thin bedrock shallow buried coal seam mining [J]. COAL ENGINEERING, 2019, 51(3): 9-12.
[4]	. [J]. COAL ENGINEERING, 2018, 50(11): 17-24.
[5]	. [J]. COAL ENGINEERING, 2018, 50(5): 29-30.
[6]	. Experimental study on stability of pillar in upward mining in pillar mined out area [J]. COAL ENGINEERING, 2018, 50(4): 5-9.
[7]	. Study on Characteristic Analysis and Construction Technology of Underground Drilling in Shendong Mining Area [J]. COAL ENGINEERING, 2018, 50(1): 31-35.
[8]	. Study on Size of Section Coal Pillar in Gently Inclined and Extra-thick Coal Seam [J]. COAL ENGINEERING, 2017, 49(10): 38-42.
[9]	. [J]. COAL ENGINEERING, 2017, 49(9): 27-30.
[10]	. Study on the Reasonable Width of the Narrow Coal Pillar of Roadway in Gob Entry Driving of Face-mining [J]. COAL ENGINEERING, 2017, 49(9): 36-39.
[11]	. Surrounding rock failure characteristics and asymmetric support control technology of narrow coal pillar roadway along goaf [J]. COAL ENGINEERING, 2017, 49(7): 48-51.
[12]	. Characteristics of surrounding rock stress and Supporting in Mining Face Surrounded by Gobs [J]. COAL ENGINEERING, 2017, 49(7): 103-105.
[13]	. The Reasonable Design of Narrow Pillar in Fully Mechanized Island Mining Working Face [J]. COAL ENGINEERING, 2017, 49(6): 9-12.
[14]	. Study of Open-off Cut Oblique Design and Process of Leveling at the Beginning Mining of Fully Mechanized Working Face [J]. COAL ENGINEERING, 2017, 49(6): 53-55.
[15]	. The negative pillar design technology of stagger gateroad mining method and its application [J]. COAL ENGINEERING, 2017, 49(5): 1-3.

Study on RoadwayLayout and Surpport for Ultra-close Coal Seams

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments