煤炭工程 ›› 2013, Vol. 45 ›› Issue (9): 107-108.doi: 10.11799/ce201309036
• 研究探讨 • 上一篇 下一篇
孔庆杰,吴倩
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
Received:
Revised:
Online:
Published:
摘要:
摘要:本文借助FLUENT对变工况离心式通风机进行了气固两相流的数值模拟,在进行数值模拟时采用整机流场的模拟,使用面发射源,分析工况变化对离心风机叶片压力面的磨损情况,得出相对优质的风机运行工况,针对此采取措施控制风机的磨损。
关键词: 离心风机, 磨损, 变工况, 数值模拟
Abstract:
Abstract: This paper makes use of the FLUENT to the variable working condition centrifugal fan on the gas-solid two phase flow numerical simulation, the simulation of the whole flow field simulation, the use of surface source, analysis condition change on centrifugal fan blade pressure surface wear, it is concluded that the relative quality fan operation condition, in view of the situation to take measures to control fan wear.
Key words: Centrifugal fans, Wear, The variable working condition, numerical simulation
孔庆杰,吴倩. 变工况对离心风机叶轮磨损的影响[J]. 煤炭工程, 2013, 45(9): 107-108.
0 / / 推荐
导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks
链接本文: http://www.coale.com.cn/CN/10.11799/ce201309036
http://www.coale.com.cn/CN/Y2013/V45/I9/107
参考文献 [1]周德湖. 离心式引风机的磨损原因及耐磨措施[J].水利电力机械,1997,10(5):37-38 [2]姚承范,许哗.费瑞乾.含尘离心风机磨损的调节特性[J].流体工程,1993(11) [3]眭曦.离心式通风机内部气固两相流场的数值模拟[D].杭州:浙江大学.2006 [4]梅丹.离心风机叶轮内气固两相流动及叶片磨损研究[D]. 武汉:武汉科技大学.2006 [5]潘海波,郭宏伟等.离心除尘风机气固两相流动的数值模拟[J].流体机械,2005.3 [6]朱宏磊,李意民,孙更生等.后盖板倾角对离心式风机磨损影响的试验研究[J].矿山机械,2005(12)