煤炭工程 ›› 2016, Vol. 48 ›› Issue (12): 53-55.doi: 10.11799/ce201612017

• 生产技术 • 上一篇    下一篇

浅埋煤层综采面超前支承压力影响范围与末采让压技术研究

秦忠诚1,张望宝2,王九利1   

  1. 1. 山东科技大学
    2. 山东科技大学矿业与安全工程学院
  • 收稿日期:2016-01-11 修回日期:2016-03-17 出版日期:2016-12-10 发布日期:2016-12-22
  • 通讯作者: 张望宝 E-mail:619331676@qq.com

Study on the Influence Scope of Advancing Abutment Pressure and the Technology of Yield Mining at Ending Stage of Fully-Mechanized Face in Shallow Seam

  • Received:2016-01-11 Revised:2016-03-17 Online:2016-12-10 Published:2016-12-22

摘要: 针对浅埋煤层综采面末采段煤柱留设和支架安全回撤问题,采用现场实测和理论分析对转龙湾煤矿23103工作面末采段进行了研究。结果表明:23103工作面末采段的超前支承压力影响范围约为19~20m,保护煤柱的极限平衡区宽度为4.86m。利用此研究成果可将23103工作面回撤通道间保护煤柱优化为20m,工作面末采段的理论让压位置取5m。经过理论分析和现场实测得出在理论让压位置处无需采取停采让压措施,直接推进即可实现工作面的快速贯通和支架的安全回撤。

关键词: 浅埋煤层, 超前支承压力, 末采让压, 支架安全回撤

Abstract: Abstract: According to the problem of reasonable coal pillar width and the safe remove of powered support at ending stage of fully-mechanized face in shallow seam,theory analysis and practice method was adapted to research the coal face of Zhuanlongwan NO.23103. The results show that the influence scope of advancing abutment pressure at ending stage of NO.23103 coal face was about 19~20 meters, the width of stress limit equilibrium zone of protective pillar was 4.86 meters. The research results can be applied to NO.23103 coal face in which the protective pillar of the entries between the recovery room was 20 meters, the yield position was determined at 5 meters. No need to take any measures at yield position through taking practice method and theory analysis, the coal face just need to keep continuing to move forward which realizing a fast coal face perforation and a safe working-face removing.

中图分类号: