带式输送机胶带撕裂检测技术综述

doi:10.11799/ce202207015

摘要/Abstract

摘要： 胶带撕裂事故时有发生，如果检测处理不及时，由于胶带运动速度很快，极易造成数十米、数百米的胶带损坏，严重时甚至损毁机架、造成巨大财产损失，危及现场工作人员生命安全。文章在系统分析胶带撕裂产生原因及特征表现的基础上，总结了目前常用的胶带撕裂检测方法，包括：基于机械操作的撕裂检测技术，基于超声波的撕裂检测技术，基于胶带改造的撕裂检测技术，基于机器视觉的撕裂检测技术和其他胶带撕裂检测技术。讨论了各种方法的基本原理和优缺点，并对胶带撕裂检测的发展方向进行了总结与展望。

关键词: 胶带, 纵向撕裂, 撕裂检测, 机器视觉

Abstract: Belt conveyor plays an important role in enterprises such as mines, ports due to its fast speed, huge transport volume and long transport distance. Conveyor belt rip occurs from time to time, and if the alarm is not given in time, the entire belt frame structure will be severely damaged. It will directly lead to huge economic loss and even threaten the safety of workers. Based on the analysis of the characteristics of belt tear, the commonly used methods for conveyor belt rip detection were summarized in this paper, the basic principles, advantages and disadvantages of the methods were discussed, and the development direction of the detection of conveyor belt rip was summarized and prospected.

中图分类号:

TD712

熊念强, 文锋, 李清, 陈磊, 周冉. 带式输送机胶带撕裂检测技术综述[J]. 煤炭工程, 2022, 54(7): 79-85.

参考文献

[1]ZHAO L, LIN Y.Typical failure analysis and processing of belt conveyor[J].Proscenia Engineering, 2011, 26(1):942-946
[2]黄民, 李恩, 顾玉华, 等.钢绳芯输送带纵向撕裂监测方法研究[J].中国矿业大学学报, 2002, 31(1):49-52
[3]GIRAUD L, MASSE S, SCHREIBER L.Belt Conveyor Safety[J].Professional Safety, 2004, 9(11):20-27
[4]FEDORKO G, MOLNAR V, MARASOVA D, et al.Failure analysis of belt conveyor damage caused by the falling material[J].Engineering Failure Analysis, 2014, 36(1):30-38
[5]朱荣涛.皮带运输机皮带撕裂原因探析及防治[J].江西煤炭科技, 2014, 3(5):98-99
[6]张敏.浅谈皮带撕裂的成因及预防[J].价值工程, 2012, 31(15):295-296
[7]李锋勃, 马怀清.皮带运输机皮带撕裂原因及防治探析[J][J].河南科技, 2014, 11(22):108-109
[8]李彦隆.井下皮带运输机皮带撕裂原因分析及对策[J]. 机械管理开发, 2015 (5): 98-99.[J].机械管理开发, 2015, 30(05):98-99
[9]刘英林.输送带纵向撕裂的检测与监视[J].山西矿业学报, 1995, 13(2):150-153
[10]Gavis G, Modern concepts in belt rip detection for steel-cord reinforced conveyor belts[C]// 4th Int.Materials Handing Conference BELTCON. 1987.
[11]Harrison A.Review of conveyor belt monitoring research in Australia[J]. Bulk Solids Handling, 1985, 6: 1181-1184.[J].Bulk Solids Handling, 1985, 6(01):1181-1184
[12]张玉建, 李允旺.输送机胶带纵向撕裂的预防与检测技术综述[J]. 能源技术与管理, 2005 (3): 19-20.[J].能源技术与管理, 2005, 01(3):19-20
[13]Zakharov A, Geike B, Grigoryev A, et al.Analysis of Devices to Detect Longitudinal Tear on Conveyor Belts[C]// E3S Web of Conferences. EDP Sciences, 2020, 174: 03006.
[14]王广丰, 许洪强, 熊永超, 等.钢绳芯输送带纵向撕裂监测系统的研究[J].矿山机械, 2005, 33(12):67-68
[15]Nicolay T, Treib A, Blum A.RF identification in the use of belt rip detection [mining product belt haulage][C]// SENSORS, 2004 IEEE. IEEE, 2004: 333-336.
[16]方崇全.基于无源 RFID 技术的输送带撕裂检测系统设计及应用[J]. 煤矿机械, 2019, 3.[J].煤矿机械, 2019, 40(03):115-117
[17]刘士杰, 刘广胜, 朱永刚.基于射频识别技术的强力带式输送机纵向撕裂保护应用研究[J]. 煤矿机械, 2019, 1.[J].煤矿机械, 2019, 40(01):40-41
[18]Dey S, Salim O, Masoumi H, et al.Health monitoring of mining conveyor belts[J]. 2020.[J].Coal Opertors’ Conference, 2020, 01(01):359-366
[19]张铮, 薛桂香.数字图像处理与机器视觉[M]. 北京: 人民邮电出版社, 2010: 340-379.
[20]余文勇, 石绘.机器视觉自动检测技术[M]. 北京: 化学工业出版社, 2013: 5-8.
[21]SONKA M, HLAVAC V, BOYLE R.Image processing, analysis, and machine vision[M]. Cengage Learning, 2014.
[22]Ponsa D, Benavente R, Lumbreras F, et al.Quality control of safety belts by machine vision inspection for real-time production[J].Optical Engineering, 2003, 42(4):1114-1120
[23]王建勋.煤矿输送带传输故障实时监测技术[J].工矿自动化, 2015, 41(1):45-48
[24]耿杰龙.基于机器视觉技术的输送带撕裂检测应用研究[J]. 煤矿现代化, 2018 (4): 59-61.[J].煤矿现代化, 2018, 4(145):59-61
[25]张晞, 顾歆, 齐悦, 等.输送带纵向撕裂差影法图像识别技术研究[J]. 煤炭科学技术, 2008 (11).[J].煤炭科学技术, 2008, 36(11):85-88
[26]祁隽燕, 谭超.数字图像处理在输送带撕裂视觉检测中的应用[J].煤矿机械, 2009, 30(12):177-178
[27]魏涛, 王召巴, 金永.煤炭输送带表面裂纹自动检测技术研究[J]. 煤矿机械, 2010 (2): 211-213.[J].煤矿机械, 2010, 31(02):211-213
[28]唐艳同, 乔铁柱, 牛犇.输送带纵向撕裂在线监测预警系统的设计[J].煤矿机械, 2012, 33(5):242-244
[29]杨洋, 张雪英, 乔铁柱, 等.基于形态学的输送带纵向撕裂边缘检测算法[J]. 煤炭技术, 2014 (7): 193-196.[J].煤炭技术, 2014, 33(07):193-195
[30]张伟, 刘海军, 李忠.输送带纵向撕裂检测方法[J].煤炭工程, 2015, 47(9):114-116
[31]马可.输送带纵向撕裂识别算法的研究与实现[J]. 橡塑技术与装备, 2016 (16): 77-79.[J].橡塑技术与装备, 2016, 42(16):77-79
[32]王铁军.矿用输送带纵撕图像检测和纵撕故障识别方法[J]. 现代商贸工业, 2018, 24.[J].现代商贸工业, 2018, 01(24):202-204
[33]张雪英, 杨洋, 乔铁柱, 等.多特征融合的输送带纵向撕裂检测[J].煤炭工程, 2015, 47(12):103-106
[34]王晓超, 乔铁柱.基于变换的输送带纵向撕裂检测方法[J].工矿自动化, 2015, 41(12):68-70
[35]高锦洋.带式输送机防纵向撕裂保护系统研究[J]. [J].机电设备与仪器仪表, 2018, 01(10):35-39
[36]Netto G G, Coelho B N, Delabrida S E, et al.Early Defect Detection in Conveyor Belts using Machine Vision[C]// VISIGRAPP (4: VISAPP). 2021: 303-310.
[37]徐辉, 刘丽静, 沈科, 邹盛.基于多道线性激光的带式输送机纵向撕裂检测[J].工矿自动化, 2021, 47(07):37-44
[38]朱剑锋.煤矿带式输送机输送带撕裂红外检测系统设计[J].新型工业化, 2017, 7(07):58-61
[39]郭健, 乔铁柱, 车剑.基于改进高斯混合模型的矿用输送带纵向撕裂检测方法[J].煤矿安全, 2020, 51(12):167-170
[40]韩斌.基于红外视觉的输送带纵向撕裂预警方法[J].机械管理开发, 2021, 36(07):134-136
[41]赵弼龙, 乔铁柱.基于支持向量机红外图像分割的输送带纵向撕裂检测方法[J].工矿自动化, 2014, 40(5):30-33
[42]陈路路, 庞宇松.用于输送带纵向撕裂检测的新型视觉传感器[J].工矿自动化, 2017, 43(02):40-43
[43]徐如强, 林福严, 苗长青.基于载荷谱的输送带纵向撕裂监测方法探讨[J].煤炭科学技术, 2009, 37(08):81-83
[44]游春霞, 魏明生, 张申.基于振动检测的输送带纵向撕带监测系统[J].矿山机械, 2011, 39(09):56-59
[45]文艺.基于检测光幕的输送带撕裂监测技术应用[J].测绘地理信息, 2014, 39(01):72-75
[46]樊平, 李洪亮, 高智剑.新型带式输送机纵向撕裂保护装置设计[J].煤矿机械, 2015, 36(06):24-26
[47]尹培坤.钢丝绳芯带式输送机监测带宽纵向撕裂保护[J].煤矿机械, 2017, 38(04):140-141
[48]Trybaa P, Blachowski J, Baej R, et al.Damage Detection Based on 3D Point Cloud Data Processing from Laser Scanning of Conveyor Belt Surface[J].Remote Sensing, 2021, 13(55):1-19
[49]Skoczyla A, Stefaniak P K, Anufriiev S, et al.Belt Conveyors Rollers Diagnostics Based on Acoustic Signal Collected Using Autonomous Legged Inspection Robot[J]. Applied Sciences, 2021, 11(2299).[J].Applied Sciences, 2021, 11(2299):1-13
[50]谢进, 任文清.煤矿钢丝绳芯输送带检测系统[J].工矿自动化, 2021, 47(S1):69-71
[51]胡青果, 索双富.基于层次分析法的输送带纵向撕裂检测技术比较研究[J].煤矿机械, 2015, 36(03):48-50