煤炭工程 ›› 2023, Vol. 55 ›› Issue (9): 79-84.doi: 10.11799/ce202309014

• 生产技术 • 上一篇    下一篇

浅埋特厚煤层采空区煤自燃危险区域立体分布特性研究#br#

郑立永,田中华,朱红金,连鹏,樊超,杨政军   

  1. 北京天地华泰矿业管理股份有限公司, 北京 100013
  • 收稿日期:2022-06-06 修回日期:2022-09-14 出版日期:2023-09-20 发布日期:2023-11-23
  • 通讯作者: 连鹏 E-mail:2497286849@qq.com

Study on the three-dimensional distribution characteristics of coal spontaneous combustion risk area in goaf of shallow buried extra thick coal seam

  • Received:2022-06-06 Revised:2022-09-14 Online:2023-09-20 Published:2023-11-23
  • Contact: Lian /Peng E-mail:2497286849@qq.com

摘要:

为了研究浅埋特厚工作面采空区自燃危险区域分布特征, 以五家沟煤矿15304工作面为研究对象, 通过理论分析、实验测试和现场观测相结合的方法, 研究了基于氧气浓度划分的采空区煤自燃立体“ 三带” 分布规律。结果表明: 15304工作面采空区煤自燃上、下限氧浓度分别为18.05%, 5.95%; 采空区水平进风侧氧化带分布在45~158m, 回风侧分布在14~75m; 垂直方向进风侧氧化带分布在6~42m, 回风侧分布在4~37m。采空区氧化带在倾向上是不对称的, 氧化带区域在进风侧距离工作面下隅角较远, 在回风侧距离工作面上隅角较近; 在水平与垂直两个方向上, 进风侧的氧化带宽度均大于在回风侧的宽度。工作面最小安全推进速度为1.64m/d, 当工作面推进速度小于该速度时, 应当强化防灭火措施。

关键词: 浅埋特厚煤层, 煤自燃, 采空区, 自燃“三带”

Abstract:

In order to study the distribution characteristics of the spontaneous combustion hazard area in the goaf of the shallow buried extra-thick working face, the three-dimensional "three zones" distribution law of coal spontaneous combustion in the goaf based on oxygen concentration was studied by combining theoretical analysis, experimental tests and field observations with the working face 15304 of Wujiagou Coal Mine. The results shown that: the upper and lower limit oxygen concentration of coal spontaneous combustion in the goaf are 18.05% and 5.95% respectively. The oxidation zone on the horizontal is 45-158 m in the inlet side, and from 14-75 m in the return side. The oxidation zone on the vertical is distributed from 6 to 42m on the inlet side and from 4 to 37m on the return side. The oxide zone is asymmetrical in tendency, with the zone farther away from the lower corner of the face on the inlet side and closer to the corner of the face on the return side. In both horizontal and vertical directions, the width of the oxide zone on the inlet side is greater than the width on the return side. The minimum safe advancing speed of the working face is 1.64m/d. When the advancing speed of the working face is less than this speed, the fire prevention measures should be reinforced.

中图分类号: