[1] JIANG C L, LI M J, LI E, et al. Investigation on unsteady flow characteristics in an axial-flow fan under stall conditions[J]. Processes, 2020, 8(8): 958-977.[2] ZHANG Q, DU J, LI Z, et al. Entropy generation analysis in a mixed-flow compressor with casing treatment[J]. Journal of Thermal Science, 2019, 28(5): 915-928.[3] FUJITA H, TAKATA H. A study on configurations of casing treatment for axial flow compressors[J]. Applied Physics Let-ters, 2008, 27(230): 1675-1681.[4] 朱俊强, 刘志伟. 4种不同型式机匣处理的实验研究及机理分析[J]. 航空学报, 1997, 18(5): 567-570.[5] 刘志伟. 缝式机匣处理的若干观察和机理探讨: DZH8521[R]. 西安: 西北工业大学, 1985.[6] 张皓光, 谭锋, 安康, 等. 缝式机匣处理及其轴向偏转角对跨声速轴流压气机稳定性的改善[J]. 航空学报, 2018, 39(8): 113-127.[7] ZHANG H G, ZHONG X Y, WANG E H, et al. Effect of dif-ferent axial deflected angles of reversed blade-angle slots on the axial flow compressor performance and stability[J]. Pro-ceedings of the Institution of Mechanical Engineers, 2023, 237(6): 1158-1169.[8] ZHANG H, LIU W, WANG E, et al. Mechanism investigation of enhancing the stability of an axial flow rotor by blade an-gle slots[J]. Proceedings of the Institution of Mechanical En-gineers, Part G: Journal of Aerospace Engineering, 2019, 233(13): 4750-4764.[9] SUNGHO Y, PATRICIA C. Casing treatment: its potential and limitations[J]. ASME Journal of Turbomachinery, 2023, 145(4): 041011.[10] BAILEY E E. Effect of grooved casing treatment on the flow range capability of a single-stage axial-flow compressor, TM X-2459[R]. Ohio: NASA, 1972. [11] HOUGHTON T, DAY I. Enhancing the stability of subsonic compressors using casing grooves[J]. Journal of Tur-bomachinery, 2011, 133(2): 021007.[12] HOUGHTON T, DAY I. Stability enhancement by casing grooves: the importance of stall inception mechanism and so-lidity[J]. Journal of Turbomachinery, 2012, 134(2): 021003.[13] MAO X, LIU B, ZHAO H. Numerical investigation for the impact of single groove on the stall margin improvement and the unsteadiness of tip leakage flow in a counter-rotating axi-al flow compressor[J]. Energies, 2017, 10(8): 1153-1153.[14] 卢家玲, 楚武利, 张皓光. 轴流压气机周向槽扩稳机理的有效利用[J]. 西北工业大学学报, 2007, 25(5): 620-624.[15] 朱国明, 杨波, 楚武利. 缝式与槽式耦合机匣处理影响压气机性能的研究[J]. 工程热物理学报, 2020, 41(6): 1412-1417. [16] LI Y H, LI J C, CHEN Y, et al. Hybrid slot-groove casing treatment for stall margin improvement on an axial flow compressor with circumferential total pressure distortion[J]. Journal of Thermal Science, 2023, 32(2): 770-785.[17] 陈庆光, 徐延辉, 郭武, 等. 轴向间距对FBCDZ-10-No20型对旋风机失速过程的影响[J]. 煤炭科学技术, 2023, 51(6): 229-236.[18] ZHU W, CAI L, WANG S, et al. Numerical investigation of circumferential groove casing treatment in a highly-loaded low-reaction transonic compressor rotor[J]. Journal of Ther-mal Science, 2020, 29(4): 916-927.[19] ANTHONY J S, JERRY R W, MICHAEL D H, et al. Laser anemometer measurements in a transonic axial-flow fan ro-tor[J]. Journal of Engineering for Gas Turbines and Power, 1981, 103(2): 430-437.[20] 高丽敏, 王磊, 茅晓晨, 等. 缝式机匣处理对对转压气机的扩稳机理[J]. 航空动力学报, 2023, 38(3): 640-654. |