煤炭工程 ›› 2013, Vol. 45 ›› Issue (5): 14-16.doi:
• 设计技术 • 上一篇 下一篇
汪永印
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
Received:
Revised:
Online:
Published:
摘要： 通过规程、规范对矿井通风设计的相关要求的分析以及矿井通风设计阶段对矿井总风量的计算过程、矿井风量分配方法的研究，在矿井通风设计实例的分析基础上，提出了矿井风量计算时确定的内部漏风量的分配方法，提出了回风井防爆门、安全出口以及井下短距离且设置风门的巷道在矿井通风设计时可以不配风的理由，提出了井下风门实际存在的漏风量的弥补方法。
关键词: 矿井通风设计实例, 内部漏风, 风量分配方法
Abstract: Through the analysis of regulations and criterions on the design of mine ventilation system, the research of the calculation of air volume and its distribution method during mine ventilation design，based on the analysis of a sample of mine design，brought forward the distribution method of inner air leakage which come with the calculation of air volume，presented the main reason that breakaway explosion door，safety exit and other short distance tunnel with door of mine ventilation system should cut off airflow，put forward the remedy method for the air leakage of door of mine ventilation system.
Key words: sample of mine ventilation design, inner air leakage, air distribution method
汪永印，江泽标，等. 矿井通风设计风量分配方法分析[J]. 煤炭工程, 2013, 45(5): 14-16.
0 / / 推荐
导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks
链接本文: http://www.coale.com.cn/CN/
http://www.coale.com.cn/CN/Y2013/V45/I5/14
