煤炭工程 ›› 2018, Vol. 50 ›› Issue (2): 40-42.doi: 10.11799/ce201802011
• 设计技术 • 上一篇 下一篇
张振宇
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
Received:
Revised:
Online:
Published:
摘要： 结合孟村煤矿主井提升机房的设计实践，从平面布置和竖向布置两方面探讨了主井提升机房建筑设计，研究了结构计算简图和截面尺寸估算方法，比较了PKPM和Midas软件对钢网架和混凝土结构共同工作的模拟结果，并从螺栓孔垫板处混凝土局部承压、箱型抗剪键、抗滑移和抗倾覆稳定性验算三方面介绍了提升机基础设计的要点，最后针对设计过程中应注意的问题提出几点体会。
关键词: 提升机房, 竖井开拓, 结构设计, 提升机基础
Abstract: At present，most domestic coal mine adopts shaft development way with coal seam buried deeper and deeper in our country. Therefore, the effect of hoist building which is one of main hoisting system of the building is particularly important. Combined with the design of Mengcun coal mine main shaft hoist house, the article introduces architectural design，structure lectotype，calculation points and calculation of anti sliding and anti overturning of hoist foundation in detail, and puts forward some experiences about the problems that should be considered in the design process, to be discussed in this paper.
中图分类号:
TD534
张振宇，刘健康. 孟村煤矿主井提升机房设计探讨[J]. 煤炭工程, 2018, 50(2): 40-42.
0 / / 推荐
导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks
链接本文: http://www.coale.com.cn/CN/10.11799/ce201802011
http://www.coale.com.cn/CN/Y2018/V50/I2/40
