煤炭工程 ›› 2022, Vol. 54 ›› Issue (6): 70-74.doi: 10.11799/ce202206014

• 生产技术 • 上一篇    下一篇

上湾煤矿22104工作面低氧原因及治理研究

王桂林1,赵晋伯1,侯开达1,张严文2   

  1. 1. 神华神东煤炭集团上湾煤矿
    2. 中国矿业大学(北京) 应急管理与安全工程学院
  • 收稿日期:2022-01-21 修回日期:2022-03-04 出版日期:2022-06-15 发布日期:2022-07-06
  • 通讯作者: 王桂林 E-mail:32195435@qq.com

Study on Causes and treatment of low oxygen in 22104 face of Shangwan Coal Mine

  • Received:2022-01-21 Revised:2022-03-04 Online:2022-06-15 Published:2022-07-06
  • Contact: Wang .Guilin E-mail:32195435@qq.com

摘要: 针对上湾煤矿22104工作面回风隅角低氧问题,对低氧气体来源及涌出原因进行研究,分析地表大气压、温度变化对采空区气体涌出影响规律。结果表明22104工作面低氧原因是由于处于CO2~N2带煤层氮气含量较高,以及遗煤氧化消耗氧气导致采空区存在大量氮气,在采动影响下地表裂隙容易与采空区形成漏风通道,使得采空区内低氧气体向工作面回风侧运移,从而导致回风隅角的气体浓度异常。在对低氧涌出原因分析的基础上,采用均压通风技术平衡工作面与采空区之间的压差,以减少采空区向工作面的漏风和低氧气体的涌出,保持工作面氧气浓度处于正常水平,为工作面回风隅角低氧治理提供技术指导,实现矿井安全高效生产。

关键词: 浅埋深, 矿井通风, 回风隅角, 均压通风, 漏风通道

Abstract: In view of the low oxygen problem in the return air corner of 22104 working face in Shangwan coal mine, the source and emission reason of low oxygen gas are studied, and the influence law of surface atmospheric pressure and temperature change on gas emission in goaf is analyzed. The results show that the low oxygen in the working face of 22104 is caused by the high nitrogen content in the CO2-N2 zone of the coal seam, and the oxygen consumption by oxidation of the left coal, resulting in a large amount of nitrogen in the goaf. Under the influence of mining, the surface fissure is easy to form an air leakage channel with the goaf, making the low oxygen gas in the goaf migrate to the return air side of the working face, resulting in abnormal gas concentration at the return air corner. Based on the analysis of the causes of low oxygen, the pressure difference between the working face and the goaf is balanced by the pressure equalization ventilation technology, so as to reduce the air leakage and low oxygen gas emission from the goaf to the working face, keep the oxygen concentration in the working face at a normal level, provide technical guidance for the treatment of low oxygen at the return air corner of the working face, and realize the safe and efficient production of the mine.

中图分类号: