煤炭工程 ›› 2014, Vol. 46 ›› Issue (8): 106-108.doi: 10.11799/ce201408033
• 研究探讨 • 上一篇 下一篇
陈兴隆
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
Received:
Revised:
Online:
Published:
摘要：
针对矿用提升钢丝绳缺陷检测的实际需要提出钢丝绳无损检测方法，检测系统通过提取损伤信号特征量，进行定量识别，提出基于最小二乘法的定量识别技术。经大量测试和实验表明：所研究开发的缺陷信号分析处理系统基本实现钢丝绳的无损检测，其信号分析处理结果也与钢丝绳实际故障情况基本符合，具有较好的实用价值。
关键词: 钢丝绳, 漏磁信号, 最小二乘法, 定量识别
Abstract:
This research put forward the steel wire rope detection system for the actual need of mining hoist. The detection system by extracting the damage signal characteristic value, quantitative identification, and the least squares curve fitting was fitted on to quantificationally analyze the flaw signals.Plenty tests and experiments show that the signal analysis and processing system can implement the aim of nondestructive detection, and the results of signal analysis and processing accord with the actual faults,it is feasible in the practical application.
Key words: Wire rope, signal of magnetic flux leakage, least square method, quantitative recognition
张楠. 矿用钢丝绳损伤定量识别技术应用研究[J]. 煤炭工程, 2014, 46(8): 106-108.
0 / / 推荐
导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks
链接本文: http://www.coale.com.cn/CN/10.11799/ce201408033
http://www.coale.com.cn/CN/Y2014/V46/I8/106
